fix(noctalia): split taskbar overview hook patch

.github/actions/check-nixos/action.yaml

@@ -0,0 +1,27 @@
+# Reference: https://github.com/ryoppippi/dotfiles/blob/main/.github/workflows/nix-build.yaml
+name: Check NixOS configurations
+description: Build every NixOS configuration and the Registry tests
+runs:
+  using: composite
+  steps:
+    - name: Build every NixOS configuration
+      shell: bash
+      run: |
+        set -euo pipefail
+
+        mapfile -t hosts < <(
+          nix eval --raw .#nixosConfigurations \
+            --apply 'configs: builtins.concatStringsSep "\n" (builtins.attrNames configs)'
+        )
+
+        installables=(.#checks.x86_64-linux.registry)
+        for host in "${hosts[@]}"; do
+          installables+=(".#nixosConfigurations.${host}.config.system.build.toplevel")
+        done
+
+        nix build \
+          --keep-going \
+          --no-link \
+          --print-build-logs \
+          --show-trace \
+          "${installables[@]}"

.github/actions/setup-nix/action.yaml

@@ -0,0 +1,22 @@
+# Reference: https://github.com/ryoppippi/dotfiles/blob/main/.github/actions/setup-nix/action.yaml
+name: Setup Nix
+description: Install Nix and cache the Nix store
+runs:
+  using: composite
+  steps:
+    - name: Allow unprivileged user namespaces
+      if: runner.os == 'Linux'
+      shell: bash
+      run: sudo sysctl -w kernel.apparmor_restrict_unprivileged_userns=0 2>/dev/null || true
+    - name: Install Nix
+      uses: nixbuild/nix-quick-install-action@9f63be77f412a248c9d9a65a4c82cf066cdf8f0c # v35
+      with:
+        nix_conf: |
+          accept-flake-config = true
+          max-jobs = auto
+    - name: Cache Nix store
+      uses: nix-community/cache-nix-action@7df957e333c1e5da7721f60227dbba6d06080569 # v7.0.2
+      with:
+        primary-key: nix-${{ runner.os }}-${{ runner.arch }}-${{ hashFiles('flake.lock') }}
+        restore-prefixes-first-match: nix-${{ runner.os }}-${{ runner.arch }}-
+        gc-max-store-size-linux: 4G

.github/workflows/nixos.yaml

@@ -0,0 +1,51 @@
+# Reference: https://github.com/ryoppippi/dotfiles/blob/main/.github/workflows/nix-build.yaml
+name: "CI: NixOS"
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - flake.nix
+      - flake.lock
+      - "flake/**"
+      - "hosts/**"
+      - "libs/**"
+      - "modules/**"
+      - "overlays/**"
+      - "shells/**"
+      - "tests/**"
+      - ".github/actions/check-nixos/**"
+      - ".github/actions/setup-nix/**"
+      - ".github/workflows/nixos.yaml"
+  pull_request:
+    paths:
+      - flake.nix
+      - flake.lock
+      - "flake/**"
+      - "hosts/**"
+      - "libs/**"
+      - "modules/**"
+      - "overlays/**"
+      - "shells/**"
+      - "tests/**"
+      - ".github/actions/check-nixos/**"
+      - ".github/actions/setup-nix/**"
+      - ".github/workflows/nixos.yaml"
+  workflow_dispatch:
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+permissions:
+  contents: read
+jobs:
+  check:
+    name: Check all NixOS configurations
+    runs-on: ubuntu-latest
+    timeout-minutes: 120
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7
+      - name: Setup Nix
+        uses: ./.github/actions/setup-nix
+      - name: Check NixOS configurations
+        uses: ./.github/actions/check-nixos

.github/workflows/update-flake.yaml

@@ -0,0 +1,48 @@
+# Reference: https://github.com/ryoppippi/dotfiles/blob/main/.github/workflows/update-flake.yaml
+name: "Bot: Update flake inputs"
+on:
+  schedule:
+    - cron: "0 6 * * *"
+  workflow_dispatch:
+concurrency:
+  group: ${{ github.workflow }}
+  cancel-in-progress: false
+permissions:
+  contents: write
+  pull-requests: write
+jobs:
+  update:
+    name: Update and validate flake inputs
+    runs-on: ubuntu-latest
+    timeout-minutes: 120
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7
+      - name: Setup Nix
+        uses: ./.github/actions/setup-nix
+      - name: Update flake inputs
+        id: update
+        run: |
+          nix flake update
+          if git diff --quiet -- flake.lock; then
+            echo 'changed=false' >> "$GITHUB_OUTPUT"
+          else
+            echo 'changed=true' >> "$GITHUB_OUTPUT"
+          fi
+      - name: Check updated NixOS configurations
+        if: steps.update.outputs.changed == 'true'
+        uses: ./.github/actions/check-nixos
+      - name: Create update pull request
+        if: steps.update.outputs.changed == 'true'
+        uses: peter-evans/create-pull-request@5f6978faf089d4d20b00c7766989d076bb2fc7f1 # v8.1.1
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          add-paths: flake.lock
+          branch: automation/update-flake-lock
+          delete-branch: true
+          commit-message: "flake: update inputs"
+          title: "flake: update inputs"
+          body: |
+            Automated update of `flake.lock`.
+
+            The updated inputs passed the Registry tests and a build of every NixOS configuration.

.gitignore

@@ -4,6 +4,7 @@
 !README.md
 !LICENSE
 !AGENTS.md
+!/docs/
 
 !.github/
 !.gitea/
@@ -19,9 +20,14 @@
 !/flake/
 !/overlays/
 
-!/modules/applications/
-!/modules/hardwares/
-!/modules/profiles/
-!/modules/services/
-!/modules/systems/
-!/modules/users/
+!/images/
+!/secrets/
+
+!/windows/
+
+!/hosts/
+!/libs/
+!/modules/
+
+!/tests/
+!/skills/

.sops.yaml

@@ -0,0 +1,20 @@
+keys:
+  - &admin_yubikey1 age1yubikey1qvy5y8kxqc63y7fk0tfv43u499a8z8q332ff087lythry9cc6hdxxkznc6t
+  - &host_x1g13 age12g85cuvg4kjfr79lqf5fx2k0d82tchrgv88xgkt7ukk2cfcsw98s2rjyat
+  - &host_ops age18rtm2dq2r62zvnhwdq0gkm24hu85r7zyleyk3jqv22zpdtw064eq7ay7dl
+  - &host_internal-app-01 age1mcp5gma7y0k59equhzqfsnn0ed335ljjtn0k08ua77htlxf0x54qsravch
+  - &host_galleria age1wh7r9wnvyrgt5efjvg2324khsf4w6e9atpmz2udr4uw7frhnvvwquzcu72
+creation_rules:
+  - path_regex: ^secrets/common/[^/]+\.ya?ml$
+    key_groups:
+      - age:
+          - *admin_yubikey1
+          - *host_x1g13
+          - *host_ops
+          - *host_internal-app-01
+          - *host_galleria
+  - path_regex: ^secrets/hosts/x1g13/[^/]+\.ya?ml$
+    key_groups:
+      - age:
+          - *admin_yubikey1
+          - *host_x1g13

AGENTS.md

@@ -1,28 +1,842 @@
 # Repository Guidelines
 
-## Project Structure & Module Organization
+## Project Structure and Ownership
 
-This repository manages NixOS and Home Manager configuration as a flake. `flake.nix` defines inputs and imports the project modules. Keep flake-level plumbing in `flake/`, reusable package overlays in `overlays/`, and development environments in `shells/`. Add configuration under the appropriate `modules/` category: `applications/`, `hardwares/`, `profiles/`, `services/`, `systems/`, or `users/`. Keep host- or user-specific choices near their owning module rather than in the root flake.
+This repository manages NixOS, nix-darwin, and Home Manager configurations as a
+flake. `flake.nix` defines inputs and delegates flake outputs through
+flake-parts. Keep configuration with the component that owns it, rather than in
+the root flake or an unrelated host.
+
+This file documents the current repository contract, not a hypothetical future
+layout. When a structural, ownership, profile, host-role, or validation change
+makes any statement here stale, update `AGENTS.md` in the same change.
+
+| Path                    | Responsibility                                                                                                    |
+| ----------------------- | ----------------------------------------------------------------------------------------------------------------- |
+| `modules/applications/` | One software component, including GUI applications, window managers, desktop environments, CLI tools, and editors |
+| `modules/systems/`      | OS foundations such as Nix, boot, locale, Wayland, and networking                                                 |
+| `modules/services/`     | Daemons, long-running services, and configuration that involves permissions or user groups                        |
+| `modules/hardwares/`    | Reusable drivers, hardware families, and VM or WSL guest configuration                                            |
+| `modules/users/`        | User identity and the user's NixOS-, nix-darwin-, and Home Manager-specific definitions                           |
+| `modules/profiles/`     | Purpose- or form-factor-oriented compositions of multiple units                                                   |
+| `hosts/`                | Machine-specific facts and the profiles selected for each machine; direct unit selections are exceptional         |
+| `libs/`                 | Registry, unit discovery, and host construction logic                                                             |
+| `overlays/`             | Package replacements and additions                                                                                |
+| `shells/`               | Development shells                                                                                                |
+| `flake/`                | Supporting flake outputs such as formatters, checks, and Git hooks                                                |
+| `skills/`               | Repository-specific Codex workflows that enforce this contract for recurring changes                              |
+
+Before adding or materially extending an application or service, read and
+follow `skills/add-application-or-service/SKILL.md`. `AGENTS.md` remains the
+authoritative contract when the skill and repository ever disagree.
+
+Use **unit** as the generic internal term for a Registry-managed component and
+**profile** for a unit that composes multiple units. Do not introduce a
+`features/` layer. Window managers and desktop environments such as niri and
+labwc belong in `modules/applications/`; do not create a separate `desktop/`
+module category.
+
+Before adding configuration, decide whether it is owned by an application,
+system foundation, service, hardware family, user, profile, or individual host.
+Prefer the following placements:
+
+| Configuration                                        | Placement                                                 |
+| ---------------------------------------------------- | --------------------------------------------------------- |
+| Nix settings shared by every system host             | `modules/systems/nix/common.nix`                          |
+| NixOS-only boot configuration                        | `modules/systems/boot/.../nixos.nix`                      |
+| Disko NixOS module and CLI                           | `modules/systems/disko/`                                  |
+| macOS-wide input, document, and dialog defaults      | `modules/systems/macos-defaults/darwin.nix`               |
+| macOS Dock defaults                                  | `modules/systems/dock/darwin.nix`                         |
+| macOS trackpad defaults                              | `modules/systems/trackpad/darwin.nix`                     |
+| Finder-specific preferences                          | `modules/applications/finder/darwin.nix`                  |
+| Ghostty-specific configuration                       | `modules/applications/ghostty/`                           |
+| niri-specific configuration                          | `modules/applications/niri/`                              |
+| Desktop applications shared by labwc and niri        | `modules/profiles/interface/linux-desktop/meta.nix`       |
+| Applications and services specific to niri           | `modules/profiles/interface/niri/meta.nix`                |
+| labwc and its session configuration                  | `modules/applications/labwc/`                             |
+| A Linux package plus its macOS Homebrew cask         | `modules/applications/<name>/home.nix` and `darwin.nix`   |
+| Docker daemon and Docker group membership            | `modules/services/docker/nixos.nix`                       |
+| The laptop unit composition                          | `modules/profiles/platform/laptop/meta.nix`               |
+| The Intel ThinkPad X1 composition                    | `modules/profiles/platform/thinkpad-x1/meta.nix`          |
+| The Intel/NVIDIA desktop composition                 | `modules/profiles/platform/intel-nvidia-desktop/meta.nix` |
+| NVIDIA GPU driver configuration                      | `modules/hardwares/nvidia/`                               |
+| The development-environment unit composition         | `modules/profiles/workload/development/meta.nix`          |
+| Cross-platform fingerprint selection                 | `modules/profiles/security/fingerprint/meta.nix`          |
+| A user's OS- and Home Manager-specific configuration | `modules/users/<name>/`                                   |
+| Host-specific monitor layout                         | `hosts/<name>/home.nix`                                   |
+| Generated host disk UUIDs                            | `hosts/<name>/hardware-configuration.nix`                 |
+| Package replacement or addition                      | `overlays/`                                               |
+| Formatter, checks, or Git hooks                      | `flake/`                                                  |
+
+## Unit Discovery and Identity
+
+A directory below `modules/` is a unit if, and only if, it contains at least one
+reserved root file or reserved Home Manager fragment. Directories used only for
+classification, such as `modules/applications/` or
+`modules/profiles/interface/`, are namespaces rather than units when they have
+no reserved fragment of their own.
+
+The Registry recognizes exactly these eight reserved paths relative to a unit:
+
+| File              | Target and responsibility                                                        |
+| ----------------- | -------------------------------------------------------------------------------- |
+| `common.nix`      | System-side configuration fragment shared by NixOS and nix-darwin                |
+| `nixos.nix`       | NixOS-only system configuration fragment                                         |
+| `darwin.nix`      | nix-darwin-only system configuration fragment                                    |
+| `home.nix`        | Home Manager fragment shared by NixOS and nix-darwin                             |
+| `home/common.nix` | Home Manager fragment shared by NixOS and nix-darwin                             |
+| `home/nixos.nix`  | Home Manager fragment loaded only on NixOS                                       |
+| `home/darwin.nix` | Home Manager fragment loaded only on nix-darwin                                  |
+| `meta.nix`        | Registry descriptor for dependencies, external modules, and descriptive metadata |
+
+Root `common.nix` is never applied to Home Manager. `home.nix` and
+`home/common.nix` have identical dispatch semantics; use either or both when a
+useful file split exists. The `home/` directory is a reserved fragment directory
+of its parent unit when it contains `common.nix`, `nixos.nix`, or `darwin.nix`;
+it is not discovered as a child unit in that case.
+
+The Registry derives a unit ID from the path relative to `modules/`, joining
+path components with dots. Category names remain plural. It also derives the
+enable option by prefixing the same components with `my` and appending `enable`.
+
+| Unit directory                     | Unit ID                   | Enable option                       |
+| ---------------------------------- | ------------------------- | ----------------------------------- |
+| `modules/applications/ghostty/`    | `applications.ghostty`    | `my.applications.ghostty.enable`    |
+| `modules/applications/niri/`       | `applications.niri`       | `my.applications.niri.enable`       |
+| `modules/systems/boot/uefi/`       | `systems.boot.uefi`       | `my.systems.boot.uefi.enable`       |
+| `modules/services/docker/`         | `services.docker`         | `my.services.docker.enable`         |
+| `modules/hardwares/qemu-guest/`    | `hardwares.qemu-guest`    | `my.hardwares.qemu-guest.enable`    |
+| `modules/users/moons/`             | `users.moons`             | `my.users.moons.enable`             |
+| `modules/profiles/interface/niri/` | `profiles.interface.niri` | `my.profiles.interface.niri.enable` |
+
+Represent option paths as attribute-path lists, never as Nix source encoded in
+strings or evaluated dynamically. Generate and read attributes with helpers such
+as `lib.setAttrByPath` and `lib.getAttrFromPath`:
+
+```nix
+{
+  id = "applications.ghostty";
+
+  optionPath = [
+    "my"
+    "applications"
+    "ghostty"
+    "enable"
+  ];
+
+  kind = "applications";
+  name = "ghostty";
+
+  relativePath = [
+    "applications"
+    "ghostty"
+  ];
+}
+```
+
+For `modules/profiles/interface/niri/`, path inference additionally gives
+`kind = "profiles"`, `group = "interface"`, and `name = "niri"`. The path is
+always authoritative for identity. `meta.nix` may provide display metadata such
+as `description`, but it must not override or alias the unit ID.
+
+## Unit Files and Fragment Contract
+
+Only reserved files that a unit actually needs should exist. The Registry
+registers present fragments and does not require empty or placeholder files. All
+of the following are valid units:
+
+```text
+# Home Manager only
+modules/applications/ghostty/
+├── home.nix
+├── home/
+│   ├── nixos.nix
+│   └── darwin.nix
+└── settings.nix
+
+# NixOS only
+modules/services/docker/
+└── nixos.nix
+
+# nix-darwin only
+modules/systems/macos-defaults/
+└── darwin.nix
+
+# NixOS and Home Manager, with metadata and helpers
+modules/applications/niri/
+├── nixos.nix
+├── home.nix
+├── meta.nix
+├── settings.nix
+└── keybindings.nix
+
+# Metadata only, commonly a composition profile
+modules/profiles/interface/niri/
+└── meta.nix
+
+# System configuration shared by NixOS and nix-darwin
+modules/systems/nix/
+└── common.nix
+```
+
+Each fragment is optional and registered independently. A unit may therefore
+contain only `home/nixos.nix` or `home/darwin.nix`; it does not need a
+placeholder `home.nix` or `home/common.nix`.
+
+### Configuration fragments
+
+Every reserved path except `meta.nix` is a configuration fragment to which the
+Registry adds the enable condition. These fragments return the configuration
+for their class directly and must not define top-level `imports`, `options`, or
+`config` attributes:
+
+```nix
+# modules/services/docker/nixos.nix
+{ primaryUser, ... }:
+{
+  virtualisation.docker = {
+    enable = true;
+    autoPrune.enable = true;
+  };
+
+  users.users.${primaryUser}.extraGroups = [
+    "docker"
+  ];
+}
+```
+
+Conceptually, the Registry supplies a wrapper like this:
+
+```nix
+{ config, lib, ... }@args:
+{
+  config =
+    lib.mkIf
+      config.my.services.docker.enable
+      (import dockerNixosPath args);
+}
+```
+
+Do not add hand-written `mkEnableOption`, `cfg`, or `mkIf` boilerplate to each
+unit. The Registry generates the enable option from the unit path and guards the
+fragment.
+
+### Helper files and directories
+
+Every path other than the eight reserved paths is an ordinary helper, regardless
+of its extension. The Registry neither discovers nor automatically imports
+helper files such as `settings.nix`, `keybindings.nix`, `packages.nix`,
+`colors.nix`, `rules.nix`, or `helpers.nix`. Import a helper explicitly from the
+reserved fragment that uses it:
+
+```nix
+# modules/applications/niri/home.nix
+{ lib, ... }:
+let
+  settings = import ./settings.nix;
+  keybindings = import ./keybindings.nix;
+in
+{
+  programs.niri.settings = lib.recursiveUpdate settings {
+    binds = keybindings;
+  };
+}
+```
+
+Do not use a leading underscore to mark a file private; `_settings.nix` has no
+special meaning. Give helper files descriptive names instead. When helpers are
+configuration functions, pass the module arguments explicitly and combine them
+with normal Nix expressions:
+
+```nix
+# modules/applications/example/home.nix
+{ lib, ... }@args:
+lib.mkMerge [
+  (import ./packages.nix args)
+  (import ./settings.nix args)
+]
+```
+
+The same discovery rule applies recursively to helper directories:
+
+```text
+modules/applications/niri/
+├── home.nix
+└── parts/
+    ├── appearance.nix
+    └── keybindings.nix
+```
+
+Here `parts/` is not a unit because it directly contains no reserved file. A
+helper directory that directly contains a root reserved file is itself
+discovered as a unit, so never use reserved filenames inside a directory that
+is intended to contain helpers only. The reserved `home/` fragment directory is
+the sole exception to ordinary recursive child-unit discovery.
+
+### Registry metadata
+
+`meta.nix` is a Registry descriptor, not a NixOS, nix-darwin, or Home Manager
+module. It may declare `description`, `includes`, and class-specific external
+module imports:
+
+```nix
+# modules/applications/niri/meta.nix
+{ inputs, ... }:
+{
+  description = "Niri Wayland compositor";
+
+  includes = [
+    "systems.wayland"
+    "services.xdg-portal"
+  ];
+
+  imports.nixos = [
+    inputs.niri-flake.nixosModules.niri
+  ];
+
+  imports.home = [
+    inputs.niri-flake.homeModules.niri
+  ];
+}
+```
+
+External modules, including modules supplied by flake inputs, define Nix module
+options and therefore belong in `meta.nix` under `imports.nixos`,
+`imports.darwin`, or `imports.home`. Do not place them in a configuration
+fragment's top-level `imports`: the Nix module system resolves imports before a
+configuration-level enable condition.
+
+`includes` lists units to enable whenever the declaring unit is enabled. Always
+use fully qualified unit IDs:
+
+```nix
+# modules/profiles/interface/niri/meta.nix
+{
+  includes = [
+    "profiles.interface.linux-desktop"
+    "applications.niri"
+    "applications.noctalia"
+    "services.ly"
+    "services.swayidle"
+  ];
+}
+```
+
+Never omit a prefix such as `applications.` merely because the including unit is
+a profile. Fully qualified IDs make ownership explicit and allow moves, name
+collisions, and missing dependencies to be detected. Do not enable another unit
+by assigning to its enable option from a class fragment; declare the dependency
+in `meta.includes`.
+
+Application metadata should include only dependencies technically required for
+the application to work. A profile owns the user's choice to adopt several
+otherwise independent applications together. For example, the niri application
+includes the Wayland foundation as a technical dependency. The
+`profiles.interface.linux-desktop` profile selects Ghostty and Nautilus because
+both labwc and niri use them, while the cross-platform `profiles.interface.gui`
+profile selects Vicinae for graphical hosts. The labwc and niri profiles select
+their compositor, Noctalia, and the session services they require. Ghostty and
+Vicinae must not depend on either compositor, and compositor-specific
+keybindings remain owned by the corresponding application unit.
+
+## Profiles
+
+Profiles compose units by purpose or form factor; they do not replace clear
+application, system, service, or hardware ownership. The current profile
+structure is:
+
+```text
+modules/profiles/
+├── README.md
+├── base/
+├── interface/
+│   ├── cli/
+│   ├── gui/
+│   ├── macos/
+│   ├── linux-desktop/
+│   ├── labwc/
+│   └── niri/
+├── networking/
+│   ├── tailscale-client/
+│   └── tailscale-subnet-router/
+├── platform/
+│   ├── nixos/
+│   ├── intel-nvidia-desktop/
+│   ├── laptop/
+│   ├── thinkpad-x1/
+│   ├── desktop/
+│   └── vm/
+├── workload/
+│   ├── development/
+│   ├── personal/
+│   ├── server/
+│   └── remote-access/
+└── security/
+    ├── fingerprint/
+    ├── secrets/
+    ├── secure-boot/
+    └── tpm-storage/
+```
+
+`modules/profiles/README.md` is the compatibility inventory for this structure.
+Whenever a profile is added, removed, renamed, changes host-class support, or
+changes meaning, update that README and every affected `hosts/default.nix`
+selection in the same change. Remove stale profile directories and references;
+do not retain compatibility aliases.
+
+The profile layers have these responsibilities:
+
+- `base` contains only invariants required by every supported host. It includes
+  `systems.nix` and the universal Atuin, tealdeer, trippy, and xh CLI tools;
+  optional secrets, interface, hardware, and workloads do not belong there.
+- `interface` describes how the host is operated. `interface.cli` is shared by
+  NixOS and macOS and includes `tio`. `interface.gui` owns cross-platform
+  graphical interface applications such as Vicinae. `interface.macos` owns the
+  macOS Finder, Dock, trackpad, and shared default preferences and includes
+  `interface.gui`.
+  `interface.linux-desktop` owns the common labwc/niri desktop selection,
+  including Ghostty and Nautilus, and also includes `interface.gui`. Labwc and
+  niri remain independently selectable and do not imply CLI or personal
+  workloads.
+- `platform` describes NixOS foundations and physical or virtual form factors.
+  macOS does not need an empty symmetric platform profile.
+- `workload` describes optional host uses. `workload.development` and
+  `workload.personal` are cross-platform profiles, not `*-linux` variants.
+- `networking` describes network roles and topology rather than user workloads.
+- `security` describes optional security policies. Select
+  `security.fingerprint` instead of listing `systems.fingerprint` directly in a
+  host. The underlying `systems.fingerprint` unit owns NixOS fingerprint
+  authentication and macOS Touch ID sudo configuration through its class
+  fragments.
+
+Do not split a semantic profile into `*-linux` and cross-platform variants merely
+because an application is installed differently on each OS. Keep the semantic
+profile cross-platform when its purpose is shared, and implement OS differences
+inside the owning application unit. For example, Chrome, Vesktop, draw.io,
+Slack, and Zoom use Linux Home Manager configuration in `home.nix` and macOS
+Homebrew casks in `darwin.nix`. Guard a Linux-only Home Manager package with the
+host platform when the same unit also has a Darwin implementation.
+
+An explicitly OS-specific profile is appropriate when the composition itself is
+OS-specific, such as `interface.macos`, `interface.linux-desktop`,
+`platform.nixos`, or a NixOS
+subnet-router. Do not create an OS suffix for a thin package difference that the
+owning application unit can express.
+
+The `desktop/` name above is a form-factor profile under `profiles/platform/`,
+not a top-level module category.
+
+A profile may consist only of `meta.includes`. Small settings that belong only
+to the composition and have no useful independent identity may go directly in
+the profile's `nixos.nix`, `darwin.nix`, or `home.nix`. Extract configuration to
+an appropriate application, system, service, or hardware unit when any of these
+conditions holds:
+
+- It should be independently enableable.
+- Multiple profiles reuse it.
+- It owns separate configuration files.
+- Its NixOS, nix-darwin, and Home Manager implementations differ.
+- Other units depend on it.
+- It involves a daemon, permissions, or user groups.
+
+`security.tpm-storage` intentionally does not own a disk identifier. A host that
+selects it must define `boot.initrd.luks.devices.cryptroot.device` in its own
+NixOS module.
+
+## Registry Responsibilities
+
+Implement unit discovery with Nix standard functionality such as
+`builtins.readDir`. Do not depend on an external indiscriminate auto-import
+mechanism, and do not design the repository around `import-tree`. Registry logic
+has these responsibilities:
+
+1. Recursively visit directories below `modules/`.
+2. Check the five reserved root filenames and the three reserved filenames
+   directly inside the unit's `home/` fragment directory.
+3. Register a directory as a unit when at least one reserved fragment exists
+   there, including a unit that has only a reserved `home/` fragment.
+4. Derive the unit ID from the path relative to `modules/`.
+5. Record only class fragments that exist.
+6. Evaluate `meta.nix` as a descriptor only when it exists.
+7. Exclude non-reserved files from discovery and implicit imports.
+8. Generate every unit's `my.<unit path>.enable` option.
+9. Enable included units from `meta.includes`.
+10. Raise a clear evaluation error for a reference to a missing unit ID.
+11. Apply only the fragments appropriate to the current host class.
+12. Pass `home.nix`, `home/common.nix`, and the matching OS-specific Home
+    Manager fragment only for hosts that enable Home Manager.
+
+A unit record may conceptually look like this; the implementation need not use
+this exact representation:
+
+```nix
+{
+  id = "applications.ghostty";
+  directory = ./applications/ghostty;
+
+  fragments = {
+    common = null;
+    nixos = null;
+    darwin = null;
+    home = ./applications/ghostty/home.nix;
+    homeCommon = null;
+    homeNixos = ./applications/ghostty/home/nixos.nix;
+    homeDarwin = ./applications/ghostty/home/darwin.nix;
+  };
+
+  meta = { };
+}
+```
+
+Keep the custom Registry limited to unit discovery, enable-option generation,
+`includes`, and class dispatch. Do not reimplement general Nix imports or Nix
+module evaluation. In particular, never infer a unit ID from metadata or
+implicitly load a non-reserved file.
+
+## Hosts and Class Dispatch
+
+`hosts/` is outside Registry discovery. A host contains machine-specific facts,
+differences, and unit selection, not reusable shared configuration. Appropriate
+host-owned data includes:
+
+- Generated `hardware-configuration.nix`.
+- Disk UUIDs and disko target devices.
+- Monitor identifiers, layout, and scale.
+- MAC addresses and static IP addresses.
+- Kernel parameters required by one machine only.
+- `system.stateVersion`.
+- Host-specific secret references.
+- The profiles enabled on that host and, only in exceptional cases, direct
+  application or other unit selections that cannot be expressed by a coherent
+  reusable profile.
+
+A host registry may use a specification like this:
+
+```nix
+# hosts/default.nix
+{
+  nix-example = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./nix-example;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "platform.vm"
+      "workload.development"
+      "workload.remote-access"
+    ];
+  };
+
+  ops = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./ops;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "platform.vm"
+      "workload.remote-access"
+    ];
+  };
+
+  internal-app-01 = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./internal-app-01;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "platform.vm"
+      "workload.server"
+    ];
+  };
+
+  installer = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./installer;
+    homeManager = false;
+
+    profiles = [ "base" ];
+  };
+
+  x1g9 = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./x1g9;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.labwc"
+      "interface.niri"
+      "platform.thinkpad-x1"
+      "security.fingerprint"
+      "workload.personal"
+    ];
+  };
+
+  x1g13 = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./x1g13;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.labwc"
+      "interface.niri"
+      "networking.tailscale-client"
+      "platform.thinkpad-x1"
+      "security.fingerprint"
+      "security.secrets"
+      "security.secure-boot"
+      "security.tpm-storage"
+      "workload.development"
+      "workload.personal"
+    ];
+  };
+
+  galleria = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./galleria;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.labwc"
+      "interface.niri"
+      "platform.intel-nvidia-desktop"
+      "security.secrets"
+      "security.secure-boot"
+      "security.tpm-storage"
+      "workload.development"
+      "workload.game"
+      "workload.personal"
+    ];
+  };
+
+  m2 = {
+    system = "aarch64-darwin";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./m2;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.macos"
+      "security.fingerprint"
+      "workload.development"
+      "workload.personal"
+    ];
+  };
+}
+```
+
+The current role assignment is intentional: nix-example is the development VM;
+ops is the remote-access VM with host-specific static networking;
+internal-app-01 is the container server VM; and installer builds the minimal
+installation ISO without Home Manager. x1g9 is a full NixOS desktop with niri,
+labwc, ly, the shared Linux desktop applications, and the personal workload.
+x1g13 is the secure NixOS development and personal ThinkPad, with the same
+desktop sessions plus Tailscale client, SOPS, Secure Boot, and TPM-backed disk
+unlock. galleria is the Intel/NVIDIA physical desktop shared with Windows; it
+uses dedicated NixOS partitions, LUKS, Secure Boot, and TPM-backed disk unlock.
+m2 is the daily-use macOS development and personal machine with the macOS
+interface defaults. Keep the desktop sessions independently selectable, and
+keep the development and personal profiles usable across NixOS and Darwin.
+
+Treat entries in `profiles` and the exceptional `applications` field as IDs
+relative to their respective category roots. Add the category prefixes during
+host construction:
+
+```nix
+selectedUnits =
+  [ "users.${spec.user}" ]
+  ++ map (name: "profiles.${name}") spec.profiles
+  ++ map (name: "applications.${name}") spec.applications
+  ++ spec.units or [ ];
+```
+
+`applications` and `units` are escape hatches, not normal host composition.
+Do not add either field when an existing profile expresses the concern, when an
+existing profile can coherently include the unit, or when the concern is
+reusable enough to deserve a small profile. For example, add a development tool
+to `workload.development` and select `security.fingerprint`; do not write
+`applications = [ "ghostty" ];` or `units = [ "systems.fingerprint" ];` in a
+host. A direct selection is permitted only for a genuinely exceptional,
+machine-specific unit that would make every reasonable profile misleading; add
+an adjacent comment explaining that exception. Prefer profiles for host
+composition and omit both escape-hatch fields by default.
+
+Host modules use normal Nix module semantics and are not Registry-guarded
+configuration fragments. For example:
+
+```text
+hosts/
+├── installer/
+│   └── nixos.nix
+├── internal-app-01/
+│   ├── nixos.nix
+│   └── hardware-configuration.nix
+├── nix-example/
+│   ├── nixos.nix
+│   └── hardware-configuration.nix
+├── ops/
+│   ├── nixos.nix
+│   └── hardware-configuration.nix
+├── galleria/
+│   ├── disk-identifiers.nix
+│   ├── disko.nix
+│   ├── hardware-configuration.nix
+│   └── nixos.nix
+├── x1g9/
+│   ├── nixos.nix
+│   └── hardware-configuration.nix
+├── x1g13/
+│   ├── nixos.nix
+│   ├── home.nix
+│   ├── disko.nix
+│   └── hardware-configuration.nix
+└── m2/
+    └── darwin.nix
+```
+
+`hosts/x1g9/nixos.nix` explicitly loads `hardware-configuration.nix` with the
+normal top-level Nix module `imports`. `hosts/x1g13/nixos.nix` loads its
+generated hardware configuration and host-local `disko.nix` the same way. Do
+not confuse these host imports with the prohibition on top-level `imports` in
+unit configuration fragments. `hosts/galleria/disko.nix` manages only the two
+dedicated NixOS partitions by PARTUUID and deliberately excludes the Windows
+disk, Windows partitions, and the Windows EFI System Partition.
+
+Derive the system class from the host's `system`:
+
+- A Linux NixOS host receives `common.nix` and `nixos.nix`.
+- A nix-darwin host receives `common.nix` and `darwin.nix`.
+- A NixOS host with integrated Home Manager additionally receives `home.nix`,
+  `home/common.nix`, and `home/nixos.nix`.
+- A nix-darwin host with integrated Home Manager additionally receives
+  `home.nix`, `home/common.nix`, and `home/darwin.nix`.
+
+Home Manager is additive, not a system class mutually exclusive with NixOS or
+nix-darwin. Normal machine configurations combine NixOS or nix-darwin with Home
+Manager; the installer ISO explicitly sets `homeManager = false`. If standalone
+Home Manager is supported later, add an explicit host kind because `system`
+alone cannot distinguish it from NixOS.
+
+Do not duplicate reusable settings in hosts, but do not force genuinely
+machine-specific values into a common unit merely to remove a host-local line.
+
+## Coding Style and Implementation Rules
+
+Use two-space indentation in Nix files and let `nixfmt` decide layout. Prefer
+small units, explicit imports, and descriptive kebab-case names, for example
+`modules/services/media-server/nixos.nix`. Use camelCase for Nix attributes
+unless an upstream option dictates otherwise. Shell snippets must pass `shfmt`
+and `shellcheck`; YAML, TOML, and Markdown are formatted by the configured
+treefmt tools.
+
+When implementing or modifying modules:
+
+- Do not create `features/` or a top-level `desktop/` module category.
+- Do not add per-unit `mkEnableOption`, `cfg`, or `mkIf` boilerplate; the Registry
+  derives and guards enable options from paths.
+- Put unit dependencies in `meta.includes`, not in direct assignments to another
+  unit's enable option from a class fragment.
+- Do not assume any non-reserved file is discovered or loaded automatically.
+- Do not require an `_` prefix for helper or private files.
+- Do not create unused reserved fragments, including placeholder files under the
+  reserved `home/` fragment directory.
+- Do not override a path-derived unit ID from `meta.nix`.
+- Keep technical application dependencies separate from the applications a
+  personal environment chooses to combine in a profile.
+- Keep cross-platform profile names semantic. Put Linux package installation in
+  an application's `home.nix` and the corresponding macOS Homebrew cask in its
+  `darwin.nix`; do not create a thin `*-linux` profile for that difference.
+- Keep shared labwc/niri selections in `profiles.interface.linux-desktop` and
+  session-specific applications or services in the respective labwc or niri
+  profile.
+- Keep `modules/profiles/README.md`, the profile directories, and host profile
+  selections synchronized whenever any of them changes.
+- Do not select applications or units directly in `hosts/default.nix` unless
+  they meet the documented exceptional, machine-specific escape-hatch rule.
+  Prefer adding the unit to an existing coherent profile or creating a small,
+  justified reusable profile.
+- Do not rely on module-list ordering to override values. Use Nix module
+  priorities such as `lib.mkDefault`, `lib.mkForce`, `lib.mkBefore`, or
+  `lib.mkAfter` explicitly when required.
+- Keep Registry responsibilities narrow; use normal Nix imports and module
+  evaluation for everything outside discovery, generated enables, includes, and
+  class dispatch.
 
 ## Build, Test, and Development Commands
 
-- `nix develop .#dotnix` enters the main development shell and installs the repository's pre-commit hooks.
-- `nix develop .#android` provides Android platform tools such as `adb` and `fastboot`.
+- `nix develop .#dotnix` enters the main development shell and installs the
+  repository's pre-commit hooks.
+- `nix develop .#android` provides Android platform tools such as `adb` and
+  `fastboot`.
 - `nix fmt` formats all supported files through treefmt.
 - `nix flake check` evaluates flake outputs and runs configured checks.
-- `pre-commit run --all-files` runs formatting, dead-code and static Nix checks, shell linting, and secret scanning.
-- `nix flake update` refreshes pinned inputs in `flake.lock`; review lockfile changes before committing.
+- `pre-commit run --all-files` runs formatting, dead-code and static Nix checks,
+  shell linting, and secret scanning.
+- `nix flake update` refreshes pinned inputs in `flake.lock`; review lockfile
+  changes before committing.
 
-If direnv is installed, `direnv allow` activates the `dotnix` shell from `.envrc` automatically.
-
-## Coding Style & Naming Conventions
-
-Use two-space indentation in Nix files and let `nixfmt` decide layout. Prefer small modules with explicit imports and descriptive kebab-case filenames, for example `modules/services/media-server.nix`. Use camelCase for Nix attributes unless an upstream option dictates otherwise. Shell snippets must pass `shfmt` and `shellcheck`; YAML, TOML, and Markdown are formatted by the configured treefmt tools.
+If direnv is installed, `direnv allow` activates the `dotnix` shell from `.envrc`
+automatically.
 
 ## Testing Guidelines
 
-There is no separate unit-test suite. Before submitting changes, run `nix flake check` and `pre-commit run --all-files`. For system-specific changes, also build or evaluate the affected NixOS/Home Manager configuration without switching the live machine. Never commit generated secrets, `.age` plaintext, or local `.direnv/` state.
+There is no separate unit-test suite. Before submitting changes, run
+`nix flake check` and `pre-commit run --all-files`. For system-specific changes,
+also build or evaluate the affected NixOS, nix-darwin, or Home Manager
+configuration without switching the live machine. Never commit generated
+secrets, `.age` plaintext, or local `.direnv/` state.
 
-## Commit & Pull Request Guidelines
+For Registry changes, test discovery of each supported fragment combination,
+dependency closure through `meta.includes`, missing-unit errors, and class
+dispatch. Verify that helper files are ignored until explicitly imported and
+that directories without a directly contained reserved file remain namespaces.
 
-Recent history favors short, lowercase, imperative subjects such as `fix` and `update action`; automated dependency commits use `chore(deps): ...`. Prefer a specific summary that states the affected area, such as `shells: add deployment tools`. Keep commits focused. Pull requests should explain the motivation, list affected hosts or profiles, report validation commands, and note any manual migration or secret-management steps. Include screenshots only for visible desktop or application configuration changes.
+For profile changes, additionally:
+
+- Check for stale profile IDs after every add, removal, or rename.
+- Evaluate every affected real host without switching it.
+- Evaluate a cross-platform profile on both NixOS and nix-darwin, even when only
+  one current host selects it.
+- Confirm `modules/profiles/README.md` accurately states compatibility and any
+  required host-owned values.
+- When adding a Darwin application fragment, verify the resulting
+  `homebrew.casks` selection as well as module evaluation.
+- Preserve the intended host roles: nix-example remains the development VM;
+  ops remains the statically networked remote-access VM; internal-app-01 remains
+  the container server VM; installer remains the Home Manager-free installation
+  ISO; x1g9 provides niri, labwc, ly, and the personal application set; x1g13
+  additionally provides the development, Tailscale client, secrets, Secure Boot,
+  and TPM storage roles; galleria remains the Intel/NVIDIA dual-boot desktop
+  with LUKS, Secure Boot, and TPM storage; m2 remains the daily-use development
+  and personal machine.
+
+## Commit and Pull Request Guidelines
+
+Recent history favors short, lowercase, imperative subjects such as `fix` and
+`update action`; automated dependency commits use `chore(deps): ...`. Prefer a
+specific summary that states the affected area, such as
+`shells: add deployment tools`. Keep commits focused. Pull requests should
+explain the motivation, list affected hosts or profiles, report validation
+commands, and note any manual migration or secret-management steps. Include
+screenshots only for visible desktop or application configuration changes.

docs/fingerprint.md

@@ -0,0 +1,68 @@
+# Fingerprint Commands
+
+This note covers the basic `fprintd` commands used by the fingerprint module.
+
+## Enroll a new fingerprint
+
+Register a fingerprint for the current user:
+
+```sh
+fprintd-enroll $USER
+```
+
+To enroll a specific finger, pass the finger name:
+
+```sh
+fprintd-enroll -f right-index-finger $USER
+```
+
+Common finger names include:
+
+- `left-thumb`
+- `left-index-finger`
+- `right-thumb`
+- `right-index-finger`
+
+Follow the prompts and swipe or touch the sensor until enrollment completes.
+
+## List enrolled fingerprints
+
+Show fingerprints registered for the current user:
+
+```sh
+fprintd-list $USER
+```
+
+You can also list fingerprints for another user:
+
+```sh
+fprintd-list <username>
+```
+
+## Delete fingerprints
+
+Delete one enrolled fingerprint for the current user:
+
+```sh
+fprintd-delete
+```
+
+Delete all enrolled fingerprints for the current user:
+
+```sh
+fprintd-delete $USER
+```
+
+Delete fingerprints for another user:
+
+```sh
+fprintd-delete <username>
+```
+
+## Verify authentication
+
+Test fingerprint authentication for the current user:
+
+```sh
+fprintd-verify
+```

docs/install.md

@@ -0,0 +1,157 @@
+# NixOSインストール手順
+
+## 事前準備
+
+1. [ISOビルド](iso-build.md)を参照してISOを作成
+2. USBに書き込んで対象マシンでブート
+
+## ネットワーク接続
+
+### 有線LAN
+
+DHCPで自動設定される。
+
+### WiFi（有線が使えない場合）
+
+```bash
+nmcli device wifi connect <SSID> --ask
+```
+
+## SSH接続
+
+コンソールに表示されたIPアドレスに接続：
+
+```bash
+ssh root@<ip-address>
+```
+
+## インストール手順
+
+### 1. dotfilesのクローン
+
+```bash
+git clone [email protected]:moons-14/dotfiles.git ~/dotfiles
+```
+
+### 2. SSHホストキーの生成
+
+新しいホスト用のSSHホストキーを生成：
+
+```bash
+ssh-keygen -t ed25519 -f /tmp/ssh_host_ed25519_key -N ""
+```
+
+### 3. age公開鍵の取得
+
+SSHホストキーからage公開鍵を取得：
+
+```bash
+ssh-to-age -i /tmp/ssh_host_ed25519_key.pub
+```
+
+出力されたage公開鍵をコピー。
+
+### 4. .sops.yamlの編集
+
+```bash
+cd ~/dotfiles
+vim .sops.yaml
+```
+
+以下を追加：
+
+```yaml
+keys:
+  - &host_<hostname> <age公開鍵>
+
+creation_rules:
+  - path_regex: ^secrets/hosts/<hostname>/[^/]+\.ya?ml$
+    key_groups:
+      - age:
+          - *admin_yubikey1
+          - *host_<hostname>
+```
+
+### 5. シークレットの再暗号化
+
+```bash
+sops updatekeys secrets/common/system.yaml
+sops updatekeys secrets/hosts/<hostname>/*.yaml
+```
+
+### 6. disko設定の作成
+
+新しいホスト用の`hosts/<hostname>/disko.nix`を作成。
+
+#### シンプル構成（暗号化なし）
+
+```nix
+_:
+{
+  disko.enableConfig = true;
+
+  disko.devices.disk.main = {
+    type = "disk";
+    device = "/dev/sda";
+    content = {
+      type = "gpt";
+      partitions = {
+        ESP = {
+          size = "512M";
+          type = "EF00";
+          content = {
+            type = "filesystem";
+            format = "vfat";
+            mountpoint = "/boot";
+          };
+        };
+        root = {
+          size = "100%";
+          content = {
+            type = "filesystem";
+            format = "ext4";
+            mountpoint = "/";
+          };
+        };
+      };
+    };
+  };
+}
+```
+
+#### LUKS暗号化 + btrfs
+
+`hosts/x1g13/disko.nix`を参照。
+
+### 7. ディスクのパーティション
+
+```bash
+cd ~/dotfiles
+nix run github:nix-community/disko -- --mode disko hosts/<hostname>/disko.nix
+```
+
+### 8. ホストキーのコピー
+
+```bash
+mkdir -p /mnt/etc/ssh
+cp /tmp/ssh_host_ed25519_key* /mnt/etc/ssh/
+chmod 600 /mnt/etc/ssh/ssh_host_ed25519_key
+```
+
+### 9. NixOSインストール
+
+```bash
+nixos-install --flake ~/dotfiles#<hostname>
+```
+
+### 10. 再起動
+
+```bash
+reboot
+```
+
+## インストール後の確認
+
+- SSHでログインできるか
+- sopsシークレットが復号できるか
+- diskoでパーティションが正しく設定されているか

docs/iso-build.md

@@ -0,0 +1,26 @@
+# カスタムISOビルド
+
+## ビルド
+
+```bash
+nix build .#nixosConfigurations.installer.config.system.build.isoImage
+```
+
+## ISO書き込み
+
+```bash
+# USBデバイスの確認
+lsblk
+
+# 書き込み（/dev/sdXは実際のデバイスに置き換える）
+sudo dd if=./result/nixos-minimal-*.iso of=/dev/sdX bs=4M status=progress
+sync
+```
+
+## ISOの特徴
+
+- SSH鍵認証でrootログイン可能
+- 有線LANはDHCPで自動設定
+- WiFiは`nmcli`で手動設定可能
+- disko/sops/ageなどのツールを内蔵
+- ブート時にIPアドレスとヘルプを表示

docs/sops-key.md

@@ -0,0 +1,17 @@
+# Generate Sops key file
+
+```bash
+mkdir -p ~/.config/sops/age
+chmod 700 ~/.config/sops/age
+
+age-plugin-yubikey --identity --slot 1 \
+  > ~/.config/sops/age/yubikey-identity.txt
+
+chmod 600 ~/.config/sops/age/yubikey-identity.txt
+```
+
+## Edit sops file
+
+```bash
+sops secrets/common/system.yaml
+```

flake.nix

@@ -11,6 +11,11 @@
       inputs.nixpkgs.follows = "nixpkgs";
     };
 
+    nix-darwin = {
+      url = "github:nix-darwin/nix-darwin/nix-darwin-26.05";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+
     # Hardware / Platform
     nixos-hardware.url = "github:NixOS/nixos-hardware/master";
     nixos-wsl.url = "github:nix-community/NixOS-WSL";
@@ -18,6 +23,11 @@
     # Desktop
     niri-flake.url = "github:sodiboo/niri-flake";
 
+    nix-hazkey = {
+      url = "github:aster-void/nix-hazkey";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+
     stylix = {
       url = "github:nix-community/stylix";
       inputs.nixpkgs.follows = "nixpkgs";
@@ -25,7 +35,13 @@
 
     # Terminal
     ghostty = {
-      url = "github:moons-14/ghostty";
+      url = "github:ghostty-org/ghostty";
+    };
+
+    # Speech to text
+    handy = {
+      url = "github:cjpais/Handy";
+      inputs.nixpkgs.follows = "nixpkgs";
     };
 
     # Shell / Launcher
@@ -36,10 +52,7 @@
       inputs.nixpkgs.follows = "nixpkgs";
     };
 
-    noctalia = {
-      url = "github:noctalia-dev/noctalia";
-      inputs.nixpkgs.follows = "nixpkgs";
-    };
+    noctalia.url = "github:noctalia-dev/noctalia/cachix";
 
     # Editor
     nixvim = {
@@ -91,7 +104,15 @@
     };
 
     # Systems
-    systems.url = "github:nix-systems/default-linux";
+    systems.url = "github:nix-systems/default";
+
+    browser-previews = {
+      url = "github:nix-community/browser-previews";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+
+    nani-translate-linux.url = "git+https://github.com/zunoser/nani-translate-linux.git";
+
   };
 
   outputs =

flake/default.nix

@@ -2,5 +2,6 @@
   imports = [
     ./formatter.nix
     ./git-hooks.nix
+    ./registry.nix
   ];
 }

flake/registry.nix

@@ -0,0 +1,54 @@
+{
+  inputs,
+  lib,
+  ...
+}:
+let
+  dotfilesLib = import ../libs {
+    inherit inputs lib;
+    root = ../.;
+  };
+  hostSpecsPath = ../hosts/default.nix;
+  hostSpecs =
+    if builtins.pathExists hostSpecsPath then
+      let
+        value = import hostSpecsPath;
+      in
+      if builtins.isFunction value then
+        value (
+          builtins.intersectAttrs (builtins.functionArgs value) {
+            inherit inputs lib;
+          }
+        )
+      else
+        value
+    else
+      { };
+  configurations = dotfilesLib.hosts.mkConfigurations hostSpecs;
+in
+{
+  flake = {
+    inherit (configurations) darwinConfigurations nixosConfigurations;
+    lib = dotfilesLib;
+  };
+
+  perSystem =
+    { pkgs, system, ... }:
+    let
+      nixosChecks =
+        lib.mapAttrs' (name: nixos: lib.nameValuePair "nixos-${name}" nixos.config.system.build.toplevel)
+          (
+            lib.filterAttrs (
+              _: nixos: nixos.pkgs.stdenv.hostPlatform.system == system
+            ) configurations.nixosConfigurations
+          );
+    in
+    {
+      checks = {
+        registry = import ../tests/registry.nix {
+          inherit inputs lib pkgs;
+        };
+      }
+      // nixosChecks;
+    };
+}

hosts/default.nix

@@ -0,0 +1,135 @@
+{
+  nix-example = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./nix-example;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "platform.vm"
+      "workload.development"
+      "workload.remote-access"
+    ];
+  };
+
+  ops = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./ops;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "platform.vm"
+      "workload.remote-access"
+    ];
+  };
+
+  internal-app-01 = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./internal-app-01;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "platform.vm"
+      "workload.server"
+    ];
+  };
+
+  installer = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./installer;
+    homeManager = false;
+
+    profiles = [ "base" ];
+  };
+
+  x1g9 = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./x1g9;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.labwc"
+      "interface.niri"
+      "platform.thinkpad-x1"
+      "security.fingerprint"
+      # "security.secrets"
+      "workload.personal"
+    ];
+  };
+
+  x1g13 = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./x1g13;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.labwc"
+      "interface.niri"
+      "networking.tailscale-client"
+      "platform.thinkpad-x1"
+      "security.fingerprint"
+      "security.secrets"
+      "security.secure-boot"
+      "security.tpm-storage"
+      "workload.development"
+      "workload.game"
+      "workload.personal"
+    ];
+  };
+
+  galleria = {
+    system = "x86_64-linux";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./galleria;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.labwc"
+      "interface.niri"
+      "platform.intel-nvidia-desktop"
+      "security.secrets"
+      "security.secure-boot"
+      "security.tpm-storage"
+      "security.fingerprint"
+      "workload.development"
+      "workload.game"
+      "workload.personal"
+    ];
+  };
+
+  m2 = {
+    system = "aarch64-darwin";
+    stateVersion = "26.05";
+    user = "moons";
+    path = ./m2;
+
+    profiles = [
+      "base"
+      "interface.cli"
+      "interface.macos"
+      "security.fingerprint"
+      # "security.secrets"
+      "workload.development"
+      "workload.game"
+      "workload.personal"
+    ];
+  };
+}

hosts/galleria/disko.nix

@@ -0,0 +1,91 @@
+_:
+let
+  espPart = "/dev/disk/by-partuuid/008b04ef-9c06-4049-bffb-3906f5c3a9c1";
+  nixosPart = "/dev/disk/by-partuuid/04295552-cbb8-4511-ac1e-1171ec20f8d1";
+
+  btrfsMountOptions = [
+    "compress=zstd"
+    "noatime"
+    "ssd"
+    "space_cache=v2"
+  ];
+in
+{
+  disko.enableConfig = true;
+
+  # These are deliberately partition paths, not the whole Windows disk. Disko
+  # must never own or destroy the disk's GPT or any Windows partition.
+  disko.devices.disk = {
+    esp = {
+      type = "disk";
+      device = espPart;
+      destroy = false;
+
+      content = {
+        type = "filesystem";
+        format = "vfat";
+        mountpoint = "/boot";
+        mountOptions = [ "umask=0077" ];
+      };
+    };
+
+    nixos = {
+      type = "disk";
+      device = nixosPart;
+      destroy = false;
+
+      content = {
+        type = "luks";
+        name = "cryptroot";
+        askPassword = true;
+        settings.allowDiscards = true;
+
+        extraFormatArgs = [
+          "--type"
+          "luks2"
+          "--pbkdf"
+          "argon2id"
+          "--label"
+          "NixOS-LUKS"
+        ];
+
+        content = {
+          type = "btrfs";
+          extraArgs = [
+            "-f"
+            "-L"
+            "NixOS"
+          ];
+
+          subvolumes = {
+            "@root" = {
+              mountpoint = "/";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@home" = {
+              mountpoint = "/home";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@nix" = {
+              mountpoint = "/nix";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@log" = {
+              mountpoint = "/var/log";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@swap" = {
+              mountpoint = "/.swapvol";
+              mountOptions = [ "noatime" ];
+              swap.swapfile.size = "32G";
+            };
+          };
+        };
+      };
+    };
+  };
+}

hosts/galleria/hardware-configuration.nix

@@ -0,0 +1,30 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  modulesPath,
+  ...
+}:
+
+{
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = [
+    "xhci_pci"
+    "ahci"
+    "nvme"
+    "usbhid"
+    "usb_storage"
+    "sd_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/galleria/home.nix

@@ -0,0 +1,46 @@
+{
+  lib,
+  config,
+  ...
+}:
+{
+  services.kanshi = {
+    enable = true;
+
+    settings = [
+      {
+        profile = {
+          name = "galleria";
+
+          outputs = [
+            {
+              criteria = "HDMI-A-1";
+              status = "enable";
+              position = "0,0";
+              scale = 1.5;
+            }
+            {
+              criteria = "DP-1";
+              status = "enable";
+              position = "2560,0";
+            }
+            {
+              criteria = "DP-2";
+              status = "enable";
+              position = "5120,0";
+              scale = 1.5;
+            }
+          ];
+        };
+      }
+    ];
+  };
+
+  home.file.".wallpapers" = {
+    source = lib.mkForce (
+      config.lib.file.mkOutOfStoreSymlink "${config.home.homeDirectory}/Pictures/wallpapers"
+    );
+
+    recursive = lib.mkForce false;
+  };
+}

hosts/galleria/nixos.nix

@@ -0,0 +1,14 @@
+{ inputs, pkgs, ... }:
+{
+  imports = [
+    ./hardware-configuration.nix
+    ./disko.nix
+  ];
+
+  boot.initrd.luks.devices.cryptroot.device =
+    "/dev/disk/by-partuuid/04295552-cbb8-4511-ac1e-1171ec20f8d1";
+
+  environment.systemPackages = with inputs.browser-previews.packages.${pkgs.system}; [
+    google-chrome-beta
+  ];
+}

hosts/installer/nixos.nix

@@ -0,0 +1,194 @@
+{
+  pkgs,
+  lib,
+  modulesPath,
+  ...
+}:
+{
+  imports = [ "${modulesPath}/installer/cd-dvd/installation-cd-minimal.nix" ];
+
+  boot.zfs.forceImportRoot = false;
+
+  networking = {
+    hostName = "nixos-installer";
+
+    networkmanager = {
+      enable = true;
+      wifi.powersave = false;
+    };
+  };
+
+  services.openssh = {
+    enable = true;
+    settings = {
+      PermitRootLogin = "prohibit-password";
+      PasswordAuthentication = false;
+      KbdInteractiveAuthentication = false;
+      PubkeyAuthentication = "yes";
+    };
+  };
+
+  users.users.root.openssh.authorizedKeys.keys = [
+    "sk-ssh-ed25519@openssh.com AAAAGnNrLXNzaC1lZDI1NTE5QG9wZW5zc2guY29tAAAAIKhxDkucmeCor6CKoXAua7DgDSzuXrZOtpdkyzQxz5+aAAAABHNzaDo= moons@moons14.com"
+    "sk-ssh-ed25519@openssh.com AAAAGnNrLXNzaC1lZDI1NTE5QG9wZW5zc2guY29tAAAAIN6hZJyng/5LgFKPjR6uZAd/00UkO0vN0uQOoIvfSELdAAAABHNzaDo= moons@moons14.com"
+  ];
+
+  environment.systemPackages = with pkgs; [
+    git
+    disko
+    sops
+    age
+    ssh-to-age
+    age-plugin-yubikey
+    yubikey-manager
+    pcsc-tools
+    mkpasswd
+    rsync
+    vim
+    wget
+    curl
+    jq
+    parted
+    cryptsetup
+    btrfs-progs
+    efibootmgr
+    pciutils
+    sbctl
+    tpm2-tools
+    util-linux
+  ];
+
+  services.pcscd.enable = true;
+
+  environment.etc."installer-help.txt".text = ''
+
+    ╔══════════════════════════════════════════════════════════════╗
+    ║                    NixOS Installer ISO                       ║
+    ╠══════════════════════════════════════════════════════════════╣
+    ║                                                              ║
+    ║  SSH Access:                                                 ║
+    ║    ssh root@<ip-address>                                     ║
+    ║                                                              ║
+    ║  Network Setup:                                              ║
+    ║    Wired:   Auto-configured via DHCP                         ║
+    ║    WiFi:    nmcli device wifi connect <SSID> --ask           ║
+    ║                                                              ║
+    ║  Installation Workflow:                                      ║
+    ║                                                              ║
+    ║  1. Clone dotfiles:                                          ║
+    ║     git clone git@github.com:moons-14/dotfiles.git ~/dotfiles║
+    ║                                                              ║
+    ║  2. Generate SSH host key for new host:                      ║
+    ║     ssh-keygen -t ed25519 -f /tmp/ssh_host_ed25519_key -N "" ║
+    ║                                                              ║
+    ║  3. Get age public key from SSH host key:                    ║
+    ║     ssh-to-age -i /tmp/ssh_host_ed25519_key.pub              ║
+    ║                                                              ║
+    ║  4. Add age key to .sops.yaml:                               ║
+    ║     cd ~/dotfiles                                            ║
+    ║     # Edit .sops.yaml and add the age key                    ║
+    ║     # Add new host entry to creation_rules                   ║
+    ║                                                              ║
+    ║  5. Re-encrypt secrets:                                      ║
+    ║     sops updatekeys secrets/common/system.yaml               ║
+    ║     sops updatekeys secrets/hosts/<host>/*.yaml              ║
+    ║                                                              ║
+    ║  6. Create disko.nix for new host:                           ║
+    ║     # Check disk devices                                     ║
+    ║     lsblk -f                                                 ║
+    ║                                                              ║
+    ║     # Create hosts/<host>/disko.nix                          ║
+    ║     # Example: LUKS + btrfs                                  ║
+    ║     # See hosts/x1g13/disko.nix for reference                ║
+    ║                                                              ║
+    ║  7. Partition disk with disko:                               ║
+    ║     nix run github:nix-community/disko -- \                  ║
+    ║       --mode disko hosts/<host>/disko.nix                    ║
+    ║                                                              ║
+    ║  8. Copy host key to installed system:                       ║
+    ║     mkdir -p /mnt/etc/ssh                                    ║
+    ║     cp /tmp/ssh_host_ed25519_key* /mnt/etc/ssh/              ║
+    ║     chmod 600 /mnt/etc/ssh/ssh_host_ed25519_key              ║
+    ║                                                              ║
+    ║  9. Install NixOS:                                           ║
+    ║     nixos-install --flake ~/dotfiles#<host>                  ║
+    ║                                                              ║
+    ║  Disko Configuration Examples:                               ║
+    ║                                                              ║
+    ║  Simple (no encryption):                                     ║
+    ║    disko.devices.disk.main = {                               ║
+    ║      type = "disk";                                          ║
+    ║      device = "/dev/sda";                                    ║
+    ║      content = {                                             ║
+    ║        type = "gpt";                                         ║
+    ║        partitions = {                                        ║
+    ║          ESP = { size = "512M"; type = "EF00";              ║
+    ║            content = { type = "filesystem";                  ║
+    ║              format = "vfat"; mountpoint = "/boot"; }; };   ║
+    ║          root = { size = "100%";                             ║
+    ║            content = { type = "filesystem";                  ║
+    ║              format = "ext4"; mountpoint = "/"; }; };       ║
+    ║        };                                                    ║
+    ║      };                                                      ║
+    ║    };                                                        ║
+    ║                                                              ║
+    ║  LUKS + btrfs (see hosts/x1g13/disko.nix):                  ║
+    ║    - Use partuuid for device path                            ║
+    ║    - Set askPassword = true for LUKS                         ║
+    ║    - Configure btrfs subvolumes                              ║
+    ║                                                              ║
+    ╚══════════════════════════════════════════════════════════════╝
+
+  '';
+
+  systemd.services.installer-banner = {
+    description = "Display installer help on console";
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig = {
+      Type = "oneshot";
+      ExecStart = "${pkgs.coreutils}/bin/cat /etc/installer-help.txt";
+      StandardOutput = "tty";
+      TTYPath = "/dev/tty1";
+    };
+  };
+
+  systemd.services.display-ip = {
+    description = "Display IP address on console";
+    wantedBy = [ "multi-user.target" ];
+    after = [ "network-online.target" ];
+    wants = [ "network-online.target" ];
+    serviceConfig = {
+      Type = "oneshot";
+      ExecStart = pkgs.writeShellScript "display-ip" ''
+        sleep 2
+        echo ""
+        echo "=== Network Interfaces ==="
+        ${pkgs.iproute2}/bin/ip -4 addr show | ${pkgs.gnugrep}/bin/grep inet
+        echo ""
+        echo "=== SSH Access ==="
+        for ip in $(${pkgs.iproute2}/bin/ip -4 addr show | ${pkgs.gnugrep}/bin/grep -oP 'inet \K[\d.]+' | ${pkgs.gnugrep}/bin/grep -v '127.0.0.1'); do
+          echo "  ssh root@$ip"
+        done
+        echo ""
+      '';
+      StandardOutput = "tty";
+      TTYPath = "/dev/tty1";
+    };
+  };
+
+  nix = {
+    settings = {
+      experimental-features = [
+        "nix-command"
+        "flakes"
+      ];
+      trusted-users = [ "root" ];
+    };
+
+    extraOptions = ''
+      experimental-features = nix-command flakes
+    '';
+  };
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

hosts/internal-app-01/hardware-configuration.nix

@@ -0,0 +1,36 @@
+# Do not modify this file! It was generated by `nixos-generate-config` and may
+# be overwritten by future invocations.
+{ lib, modulesPath, ... }:
+{
+  imports = [ (modulesPath + "/profiles/qemu-guest.nix") ];
+
+  boot.initrd.availableKernelModules = [
+    "ata_piix"
+    "uhci_hcd"
+    "virtio_pci"
+    "virtio_scsi"
+    "sd_mod"
+    "sr_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/1b12ab98-2537-4207-a3f4-bb8ba7b53b00";
+    fsType = "ext4";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/8365-C778";
+    fsType = "vfat";
+    options = [
+      "fmask=0077"
+      "dmask=0077"
+    ];
+  };
+
+  swapDevices = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

hosts/internal-app-01/nixos.nix

@@ -0,0 +1,3 @@
+{
+  imports = [ ./hardware-configuration.nix ];
+}

hosts/m2/darwin.nix

@@ -0,0 +1,10 @@
+{ hostName, ... }:
+{
+  # networking.hostName and networking.localHostName are derived from the
+  # registry name; computerName controls the user-visible macOS name.
+  networking.computerName = hostName;
+
+  # Keep this value stable after the first activation. It is independent of
+  # the Home Manager stateVersion in hosts/default.nix.
+  system.stateVersion = 7;
+}

hosts/nix-example/hardware-configuration.nix

@@ -0,0 +1,36 @@
+# Do not modify this file! It was generated by `nixos-generate-config` and may
+# be overwritten by future invocations.
+{ lib, modulesPath, ... }:
+{
+  imports = [ (modulesPath + "/profiles/qemu-guest.nix") ];
+
+  boot.initrd.availableKernelModules = [
+    "ata_piix"
+    "uhci_hcd"
+    "virtio_pci"
+    "virtio_scsi"
+    "sd_mod"
+    "sr_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/8f0eaec6-5dc9-4821-aa8d-fb6809b5a5bf";
+    fsType = "ext4";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/201C-961B";
+    fsType = "vfat";
+    options = [
+      "fmask=0077"
+      "dmask=0077"
+    ];
+  };
+
+  swapDevices = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

hosts/nix-example/nixos.nix

@@ -0,0 +1,3 @@
+{
+  imports = [ ./hardware-configuration.nix ];
+}

hosts/ops/hardware-configuration.nix

@@ -0,0 +1,36 @@
+# Do not modify this file! It was generated by `nixos-generate-config` and may
+# be overwritten by future invocations.
+{ lib, modulesPath, ... }:
+{
+  imports = [ (modulesPath + "/profiles/qemu-guest.nix") ];
+
+  boot.initrd.availableKernelModules = [
+    "ata_piix"
+    "uhci_hcd"
+    "virtio_pci"
+    "virtio_scsi"
+    "sd_mod"
+    "sr_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/69fa2193-1e4f-438a-8898-5de8a3f36e5b";
+    fsType = "ext4";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/D09B-4277";
+    fsType = "vfat";
+    options = [
+      "fmask=0077"
+      "dmask=0077"
+    ];
+  };
+
+  swapDevices = [ ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

hosts/ops/nixos.nix

@@ -0,0 +1,51 @@
+{
+  imports = [ ./hardware-configuration.nix ];
+
+  networking = {
+    useDHCP = false;
+
+    interfaces = {
+      ens18 = {
+        useDHCP = false;
+        ipv4.addresses = [
+          {
+            address = "10.50.128.20";
+            prefixLength = 24;
+          }
+        ];
+      };
+
+      ens19 = {
+        useDHCP = false;
+        ipv4.addresses = [
+          {
+            address = "10.50.7.101";
+            prefixLength = 24;
+          }
+        ];
+      };
+
+      ens20 = {
+        useDHCP = false;
+        ipv4.routes = [
+          {
+            address = "10.50.64.0";
+            prefixLength = 24;
+            via = "10.50.82.1";
+          }
+        ];
+        ipv4.addresses = [
+          {
+            address = "10.50.82.10";
+            prefixLength = 24;
+          }
+        ];
+      };
+    };
+
+    defaultGateway = {
+      address = "10.50.128.1";
+      interface = "ens18";
+    };
+  };
+}

hosts/x1g13/disko.nix

@@ -0,0 +1,89 @@
+_:
+let
+  espPart = "/dev/disk/by-partuuid/a53e3b19-67de-40de-9ded-3eac3117689a";
+  nixosPart = "/dev/disk/by-partuuid/311d0f9c-f35f-42e6-b6fc-a4d67dd21b2e";
+
+  btrfsMountOptions = [
+    "compress=zstd"
+    "noatime"
+    "ssd"
+    "space_cache=v2"
+  ];
+in
+{
+  disko.enableConfig = true;
+
+  disko.devices.disk = {
+    esp = {
+      type = "disk";
+      device = espPart;
+      destroy = false;
+
+      content = {
+        type = "filesystem";
+        format = "vfat";
+        mountpoint = "/boot";
+        mountOptions = [ "umask=0077" ];
+      };
+    };
+
+    nixos = {
+      type = "disk";
+      device = nixosPart;
+      destroy = false;
+
+      content = {
+        type = "luks";
+        name = "cryptroot";
+        askPassword = true;
+        settings.allowDiscards = true;
+
+        extraFormatArgs = [
+          "--type"
+          "luks2"
+          "--pbkdf"
+          "argon2id"
+          "--label"
+          "NixOS-LUKS"
+        ];
+
+        content = {
+          type = "btrfs";
+          extraArgs = [
+            "-f"
+            "-L"
+            "NixOS"
+          ];
+
+          subvolumes = {
+            "@root" = {
+              mountpoint = "/";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@home" = {
+              mountpoint = "/home";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@nix" = {
+              mountpoint = "/nix";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@log" = {
+              mountpoint = "/var/log";
+              mountOptions = btrfsMountOptions;
+            };
+
+            "@swap" = {
+              mountpoint = "/.swapvol";
+              mountOptions = [ "noatime" ];
+              swap.swapfile.size = "32G";
+            };
+          };
+        };
+      };
+    };
+  };
+}

hosts/x1g13/hardware-configuration.nix

@@ -0,0 +1,32 @@
+# Do not modify this file! It was generated by `nixos-generate-config`
+# and may be overwritten by future invocations. Make changes in nixos.nix.
+{
+  config,
+  lib,
+  modulesPath,
+  ...
+}:
+
+{
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = [
+    "xhci_pci"
+    "thunderbolt"
+    "nvme"
+    "usb_storage"
+    "sd_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  swapDevices = [ ];
+
+  networking.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/x1g13/home.nix

@@ -0,0 +1,22 @@
+{
+  services.kanshi = {
+    enable = true;
+
+    settings = [
+      {
+        profile = {
+          name = "x1g13";
+
+          outputs = [
+            {
+              criteria = "eDP-1";
+              status = "enable";
+              position = "0,0";
+              scale = 1.5;
+            }
+          ];
+        };
+      }
+    ];
+  };
+}

hosts/x1g13/nixos.nix

@@ -0,0 +1,9 @@
+{
+  imports = [
+    ./hardware-configuration.nix
+    ./disko.nix
+  ];
+
+  boot.initrd.luks.devices.cryptroot.device =
+    "/dev/disk/by-partuuid/311d0f9c-f35f-42e6-b6fc-a4d67dd21b2e";
+}

hosts/x1g9/hardware-configuration.nix

@@ -0,0 +1,52 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  modulesPath,
+  ...
+}:
+
+{
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = [
+    "xhci_pci"
+    "thunderbolt"
+    "nvme"
+    "usb_storage"
+    "sd_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/16b29578-6836-414b-a5e1-863bc21c5fc3";
+    fsType = "ext4";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/209A-C8C9";
+    fsType = "vfat";
+    options = [
+      "fmask=0077"
+      "dmask=0077"
+    ];
+  };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp0s20f3.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/x1g9/nixos.nix

@@ -0,0 +1,5 @@
+{
+  imports = [
+    ./hardware-configuration.nix
+  ];
+}

libs/default.nix

@@ -0,0 +1,17 @@
+{
+  inputs,
+  lib ? inputs.nixpkgs.lib,
+  root,
+}:
+let
+  registry = import ./registry.nix {
+    inherit inputs lib;
+    modulesRoot = root + "/modules";
+  };
+  hosts = import ./hosts.nix {
+    inherit inputs lib registry;
+  };
+in
+{
+  inherit hosts registry;
+}

libs/hosts.nix

@@ -0,0 +1,191 @@
+{
+  inputs,
+  lib,
+  registry,
+}:
+let
+  ensure =
+    condition: message: value:
+    if condition then value else throw "host registry: ${message}";
+
+  isLinux = system: lib.hasSuffix "-linux" system;
+  isDarwin = system: lib.hasSuffix "-darwin" system;
+
+  hostFile =
+    spec: name:
+    let
+      path = spec.path + "/${name}";
+    in
+    if builtins.pathExists path then path else null;
+
+  selectedUnits =
+    spec:
+    [ "users.${spec.user}" ]
+    ++ map (name: "profiles.${name}") (spec.profiles or [ ])
+    ++ map (name: "applications.${name}") (spec.applications or [ ])
+    ++ (spec.units or [ ]);
+
+  validateSpec =
+    name: spec:
+    ensure (builtins.isAttrs spec) "${name}: host specification must be an attribute set" (
+      ensure (spec ? system && builtins.isString spec.system) "${name}: system is required" (
+        ensure (isLinux spec.system || isDarwin spec.system)
+          "${name}: unsupported system '${spec.system}'; expected a Linux NixOS or Darwin system"
+          (
+            ensure (spec ? user && builtins.isString spec.user && spec.user != "") "${name}: user is required" (
+              ensure (spec ? path && builtins.pathExists spec.path)
+                "${name}: path must name an existing host directory"
+                (
+                  ensure
+                    (
+                      spec ? stateVersion
+                      && builtins.isString spec.stateVersion
+                      && builtins.match "[0-9][0-9]\\.[0-9][0-9]" spec.stateVersion != null
+                    )
+                    "${name}: stateVersion is required and must have the form YY.MM"
+                    (
+                      ensure
+                        (lib.all
+                          (field: builtins.isList (spec.${field} or [ ]) && lib.all builtins.isString (spec.${field} or [ ]))
+                          [
+                            "profiles"
+                            "applications"
+                            "units"
+                          ]
+                        )
+                        "${name}: profiles, applications, and units must be lists of strings"
+                        (ensure (builtins.isBool (spec.homeManager or true)) "${name}: homeManager must be a boolean" spec)
+                    )
+                )
+            )
+          )
+      )
+    );
+
+  mkSpecialArgs = name: spec: {
+    inherit inputs registry;
+    inherit (spec) system;
+    hostName = name;
+    primaryUser = spec.user;
+  };
+
+  mkHomeManagerModule =
+    name: spec: selected:
+    let
+      homePath = hostFile spec "home.nix";
+      homeModules = [
+        (registry.mkModule {
+          class = "home";
+          systemClass = "nixos";
+        })
+        (registry.mkSelectionModule selected)
+        { home.stateVersion = spec.stateVersion; }
+      ]
+      ++ lib.optional (homePath != null) homePath;
+    in
+    {
+      imports = [ inputs.home-manager.nixosModules.home-manager ];
+
+      home-manager = {
+        useGlobalPkgs = true;
+        useUserPackages = true;
+        extraSpecialArgs = mkSpecialArgs name spec;
+        users.${spec.user}.imports = homeModules;
+      };
+    };
+
+  mkDarwinHomeManagerModule =
+    name: spec: selected:
+    let
+      homePath = hostFile spec "home.nix";
+      homeModules = [
+        (registry.mkModule {
+          class = "home";
+          systemClass = "darwin";
+        })
+        (registry.mkSelectionModule selected)
+        { home.stateVersion = spec.stateVersion; }
+      ]
+      ++ lib.optional (homePath != null) homePath;
+    in
+    {
+      imports = [ inputs.home-manager.darwinModules.home-manager ];
+
+      home-manager = {
+        useGlobalPkgs = true;
+        useUserPackages = true;
+        extraSpecialArgs = mkSpecialArgs name spec;
+        users.${spec.user}.imports = homeModules;
+      };
+    };
+
+  mkNixos =
+    name: rawSpec:
+    let
+      spec = validateSpec name rawSpec;
+      selected = registry.validateUnitIds (selectedUnits spec);
+      nixosPath = hostFile spec "nixos.nix";
+      modules = [
+        (registry.mkModule { class = "nixos"; })
+        (registry.mkSelectionModule selected)
+        {
+          networking.hostName = lib.mkDefault name;
+          system.stateVersion = spec.stateVersion;
+        }
+      ]
+      ++ lib.optional (spec.homeManager or true) (mkHomeManagerModule name spec selected)
+      ++ lib.optional (nixosPath != null) nixosPath;
+    in
+    inputs.nixpkgs.lib.nixosSystem {
+      inherit (spec) system;
+      specialArgs = mkSpecialArgs name spec;
+      inherit modules;
+    };
+
+  mkDarwin =
+    name: rawSpec:
+    let
+      spec = validateSpec name rawSpec;
+      selected = registry.validateUnitIds (selectedUnits spec);
+      darwinPath = hostFile spec "darwin.nix";
+      modules = [
+        (registry.mkModule { class = "darwin"; })
+        (registry.mkSelectionModule selected)
+        {
+          networking.hostName = lib.mkDefault name;
+          system.primaryUser = lib.mkDefault spec.user;
+        }
+      ]
+      ++ lib.optional (spec.homeManager or true) (mkDarwinHomeManagerModule name spec selected)
+      ++ lib.optional (darwinPath != null) darwinPath;
+    in
+    ensure (inputs ? nix-darwin) "${name}: the nix-darwin input is required" (
+      inputs.nix-darwin.lib.darwinSystem {
+        inherit (spec) system;
+        specialArgs = mkSpecialArgs name spec;
+        inherit modules;
+      }
+    );
+
+  mkConfigurations =
+    hostSpecs:
+    let
+      validated = lib.mapAttrs validateSpec hostSpecs;
+    in
+    {
+      nixosConfigurations = lib.mapAttrs mkNixos (
+        lib.filterAttrs (_: spec: isLinux spec.system) validated
+      );
+      darwinConfigurations = lib.mapAttrs mkDarwin (
+        lib.filterAttrs (_: spec: isDarwin spec.system) validated
+      );
+    };
+in
+{
+  inherit
+    mkConfigurations
+    mkDarwin
+    mkNixos
+    selectedUnits
+    ;
+}

libs/registry.nix

@@ -0,0 +1,386 @@
+{
+  inputs,
+  lib,
+  modulesRoot,
+}:
+let
+  rootFragmentFiles = {
+    common = "common.nix";
+    nixos = "nixos.nix";
+    darwin = "darwin.nix";
+    home = "home.nix";
+    meta = "meta.nix";
+  };
+
+  homeFragmentFiles = {
+    homeCommon = "common.nix";
+    homeNixos = "nixos.nix";
+    homeDarwin = "darwin.nix";
+  };
+
+  fragmentFileNames = rootFragmentFiles // lib.mapAttrs (_: name: "home/${name}") homeFragmentFiles;
+
+  isFile = kind: kind == "regular" || kind == "symlink";
+
+  ensure =
+    condition: message: value:
+    if condition then value else throw "unit registry: ${message}";
+
+  callWithAvailableArgs =
+    value: availableArgs:
+    if builtins.isFunction value then
+      value (builtins.intersectAttrs (builtins.functionArgs value) availableArgs)
+    else
+      value;
+
+  pathFor =
+    relativePath:
+    if relativePath == [ ] then
+      modulesRoot
+    else
+      modulesRoot + "/${lib.concatStringsSep "/" relativePath}";
+
+  entryIsFile = entries: name: builtins.hasAttr name entries && isFile entries.${name};
+
+  normalizeMeta =
+    unit:
+    let
+      metaPath = unit.fragments.meta;
+      importedValue =
+        if metaPath == null then
+          { }
+        else
+          callWithAvailableArgs (import metaPath) {
+            inherit inputs lib unit;
+          };
+      imported =
+        ensure (builtins.isAttrs importedValue) "${unit.id}: meta.nix must return an attribute set"
+          importedValue;
+      allowedKeys = [
+        "description"
+        "includes"
+        "imports"
+      ];
+      unknownKeys = lib.filter (name: !(builtins.elem name allowedKeys)) (builtins.attrNames imported);
+      description = imported.description or null;
+      includes = imported.includes or [ ];
+      imports = imported.imports or { };
+      allowedImportKeys = [
+        "nixos"
+        "darwin"
+        "home"
+      ];
+      unknownImportKeys =
+        if builtins.isAttrs imports then
+          lib.filter (name: !(builtins.elem name allowedImportKeys)) (builtins.attrNames imports)
+        else
+          [ ];
+      normalized = {
+        inherit description includes;
+        imports = {
+          nixos = imports.nixos or [ ];
+          darwin = imports.darwin or [ ];
+          home = imports.home or [ ];
+        };
+      };
+    in
+    ensure (unknownKeys == [ ])
+      "${unit.id}: meta.nix has unsupported keys: ${lib.concatStringsSep ", " unknownKeys}"
+      (
+        ensure (description == null || builtins.isString description)
+          "${unit.id}: meta.description must be a string"
+          (
+            ensure (builtins.isList includes && lib.all builtins.isString includes)
+              "${unit.id}: meta.includes must be a list of fully qualified unit IDs"
+              (
+                ensure (lib.unique includes == includes) "${unit.id}: meta.includes contains duplicate unit IDs" (
+                  ensure (builtins.isAttrs imports) "${unit.id}: meta.imports must be an attribute set" (
+                    ensure (unknownImportKeys == [ ])
+                      "${unit.id}: meta.imports has unsupported classes: ${lib.concatStringsSep ", " unknownImportKeys}"
+                      (
+                        ensure (lib.all builtins.isList [
+                          normalized.imports.nixos
+                          normalized.imports.darwin
+                          normalized.imports.home
+                        ]) "${unit.id}: every meta.imports.<class> value must be a list" normalized
+                      )
+                  )
+                )
+              )
+          )
+      );
+
+  makeUnit =
+    relativePath: entries: homeEntries:
+    let
+      directory = pathFor relativePath;
+      id = lib.concatStringsSep "." relativePath;
+      rootFragments = lib.mapAttrs (
+        _class: fileName: if entryIsFile entries fileName then directory + "/${fileName}" else null
+      ) rootFragmentFiles;
+      homeFragments = lib.mapAttrs (
+        _class: fileName: if entryIsFile homeEntries fileName then directory + "/home/${fileName}" else null
+      ) homeFragmentFiles;
+      fragments = rootFragments // homeFragments;
+      baseUnit = {
+        inherit
+          id
+          directory
+          fragments
+          relativePath
+          ;
+        optionPath = [ "my" ] ++ relativePath ++ [ "enable" ];
+        kind = builtins.head relativePath;
+        name = lib.last relativePath;
+      }
+      //
+        lib.optionalAttrs (builtins.length relativePath > 2 && builtins.head relativePath == "profiles")
+          {
+            group = builtins.elemAt relativePath 1;
+          };
+    in
+    ensure (relativePath != [ ]) "the modules root cannot itself be a unit" (
+      ensure (lib.all (component: component != "" && !(lib.hasInfix "." component)) relativePath)
+        "${id}: path components must be non-empty and must not contain dots"
+        (baseUnit // { meta = normalizeMeta baseUnit; })
+    );
+
+  walk =
+    relativePath:
+    let
+      directory = pathFor relativePath;
+      entries = builtins.readDir directory;
+      homeEntries =
+        if relativePath != [ ] && (entries.home or null) == "directory" then
+          builtins.readDir (directory + "/home")
+        else
+          { };
+      hasRootFragment = lib.any (fileName: entryIsFile entries fileName) (
+        builtins.attrValues rootFragmentFiles
+      );
+      hasHomeFragment = lib.any (fileName: entryIsFile homeEntries fileName) (
+        builtins.attrValues homeFragmentFiles
+      );
+      hasFragment = hasRootFragment || hasHomeFragment;
+      childDirectories = lib.filter (
+        name: entries.${name} == "directory" && !(name == "home" && hasHomeFragment)
+      ) (builtins.attrNames entries);
+      current = lib.optional hasFragment (makeUnit relativePath entries homeEntries);
+      children = lib.concatMap (name: walk (relativePath ++ [ name ])) childDirectories;
+    in
+    current ++ children;
+
+  discoveredUnits =
+    ensure (builtins.pathExists modulesRoot) "modules root does not exist: ${toString modulesRoot}"
+      (walk [ ]);
+  unitsById = builtins.listToAttrs (map (unit: lib.nameValuePair unit.id unit) discoveredUnits);
+
+  dependencyValidation = lib.foldl' (
+    valid: unit:
+    lib.foldl' (
+      inner: includedId:
+      if builtins.hasAttr includedId unitsById then
+        inner
+      else
+        throw "unit registry: ${unit.id} includes missing unit '${includedId}'"
+    ) valid unit.meta.includes
+  ) true discoveredUnits;
+
+  units = builtins.seq dependencyValidation unitsById;
+  unitIds = builtins.attrNames units;
+
+  getUnit =
+    id: if builtins.hasAttr id units then units.${id} else throw "unit registry: unknown unit '${id}'";
+
+  validateUnitIds =
+    ids:
+    ensure (
+      builtins.isList ids && lib.all builtins.isString ids
+    ) "selected units must be a list of strings" (map (id: builtins.seq (getUnit id) id) ids);
+
+  optionDefinitions = lib.foldl' lib.recursiveUpdate { } (
+    map (
+      unit:
+      lib.setAttrByPath unit.optionPath (
+        lib.mkOption {
+          type = lib.types.bool;
+          default = false;
+          description =
+            if unit.meta.description == null then
+              "Whether to enable the ${unit.id} unit."
+            else
+              "Whether to enable ${unit.meta.description}.";
+        }
+      )
+    ) discoveredUnits
+  );
+
+  enabled = config: unit: lib.getAttrFromPath unit.optionPath config;
+
+  enableUnit = id: lib.setAttrByPath (getUnit id).optionPath true;
+
+  includeConfig =
+    config: unit: lib.mkIf (enabled config unit) (lib.mkMerge (map enableUnit unit.meta.includes));
+
+  fragmentClasses = {
+    nixos = [
+      "common"
+      "nixos"
+    ];
+    darwin = [
+      "common"
+      "darwin"
+    ];
+    home = {
+      nixos = [
+        "home"
+        "homeCommon"
+        "homeNixos"
+      ];
+      darwin = [
+        "home"
+        "homeCommon"
+        "homeDarwin"
+      ];
+    };
+  };
+
+  fragmentClassesFor =
+    {
+      class,
+      systemClass,
+    }:
+    ensure (builtins.hasAttr class fragmentClasses) "unsupported module class '${class}'" (
+      if class == "home" then
+        ensure
+          (builtins.elem systemClass [
+            "nixos"
+            "darwin"
+          ])
+          "the home module class requires systemClass to be 'nixos' or 'darwin'"
+          fragmentClasses.home.${systemClass}
+      else
+        ensure (
+          systemClass == null
+        ) "systemClass is only supported for the home module class" fragmentClasses.${class}
+    );
+
+  applyFragment =
+    {
+      config,
+      fragmentName,
+      fragmentPath,
+      options,
+      specialArgs,
+      unit,
+    }:
+    let
+      fragment = import fragmentPath;
+      directArgs = specialArgs // {
+        inherit
+          config
+          lib
+          options
+          specialArgs
+          unit
+          ;
+      };
+      fragmentArgSpec = builtins.functionArgs fragment;
+      fragmentArgs = builtins.listToAttrs (
+        lib.concatMap (
+          name:
+          if builtins.hasAttr name directArgs then
+            [ (lib.nameValuePair name directArgs.${name}) ]
+          else if fragmentArgSpec.${name} then
+            [ ]
+          else
+            [ (lib.nameValuePair name config._module.args.${name}) ]
+        ) (builtins.attrNames fragmentArgSpec)
+      );
+      resultValue = if builtins.isFunction fragment then fragment fragmentArgs else fragment;
+      result =
+        ensure (builtins.isAttrs resultValue) "${unit.id}: ${fragmentName} must return an attribute set"
+          resultValue;
+      forbiddenKeys = lib.filter (name: builtins.hasAttr name result) [
+        "imports"
+        "options"
+        "config"
+      ];
+    in
+    ensure (forbiddenKeys == [ ])
+      "${unit.id}: ${fragmentName} is a configuration fragment and cannot define top-level ${lib.concatStringsSep ", " forbiddenKeys}"
+      result;
+
+  externalImports = class: lib.concatMap (unit: unit.meta.imports.${class}) discoveredUnits;
+
+  mkModule =
+    {
+      class,
+      systemClass ? null,
+    }:
+    let
+      selectedFragmentClasses = fragmentClassesFor { inherit class systemClass; };
+    in
+    builtins.seq selectedFragmentClasses (
+      builtins.seq dependencyValidation (
+        {
+          config,
+          lib,
+          options,
+          specialArgs,
+          ...
+        }:
+        let
+          fragmentConfigs = lib.concatMap (
+            unit:
+            lib.filter (value: value != null) (
+              map (
+                fragmentClass:
+                let
+                  fragmentName = fragmentFileNames.${fragmentClass};
+                  fragmentPath = unit.fragments.${fragmentClass};
+                in
+                if fragmentPath == null then
+                  null
+                else
+                  lib.mkIf (enabled config unit) (applyFragment {
+                    inherit
+                      config
+                      fragmentName
+                      fragmentPath
+                      options
+                      specialArgs
+                      unit
+                      ;
+                  })
+              ) selectedFragmentClasses
+            )
+          ) discoveredUnits;
+        in
+        {
+          imports = externalImports class;
+          options = optionDefinitions;
+          config = lib.mkMerge ((map (includeConfig config) discoveredUnits) ++ fragmentConfigs);
+        }
+      )
+    );
+
+  mkSelectionModule =
+    selectedIds:
+    let
+      checkedIds = validateUnitIds (lib.unique selectedIds);
+    in
+    {
+      config = lib.mkMerge (map enableUnit checkedIds);
+    };
+in
+{
+  inherit
+    getUnit
+    mkModule
+    mkSelectionModule
+    unitIds
+    units
+    validateUnitIds
+    ;
+}

modules/applications/1password/common.nix

@@ -0,0 +1,4 @@
+_: {
+  programs._1password-gui.enable = true;
+  programs._1password.enable = true;
+}

modules/applications/1password/nixos.nix

@@ -0,0 +1,9 @@
+{ primaryUser, lib, ... }:
+{
+  programs._1password-gui.polkitPolicyOwners = [ primaryUser ];
+
+  # 1Password SSH Agentと競合するagentを無効化
+  programs.ssh.startAgent = lib.mkForce false;
+  programs.gnupg.agent.enableSSHSupport = lib.mkForce false;
+  services.gnome.gcr-ssh-agent.enable = lib.mkForce false;
+}

modules/applications/activitywatch/darwin.nix

@@ -0,0 +1,8 @@
+{
+  homebrew.casks = [ "activitywatch" ];
+
+  launchd.agents.activitywatch = {
+    command = "/usr/bin/open -gja ActivityWatch";
+    serviceConfig.RunAtLoad = true;
+  };
+}

modules/applications/activitywatch/home/nixos.nix

@@ -0,0 +1,11 @@
+{ pkgs, ... }:
+{
+  services.activitywatch = {
+    enable = true;
+
+    watchers.aw-awatcher = {
+      package = pkgs.awatcher;
+      executable = "awatcher";
+    };
+  };
+}

modules/applications/activitywatch/meta.nix

@@ -0,0 +1,3 @@
+{
+  description = "ActivityWatch automated time tracker";
+}

modules/applications/arduino/home.nix

@@ -0,0 +1,4 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.arduino-cli ];
+}

modules/applications/arduino/nixos.nix

@@ -0,0 +1,14 @@
+{ pkgs, ... }:
+let
+  arduinoIdeX11 = pkgs.arduino-ide.overrideAttrs (old: {
+    nativeBuildInputs = (old.nativeBuildInputs or [ ]) ++ [ pkgs.makeWrapper ];
+
+    postFixup = (old.postFixup or "") + ''
+      wrapProgram $out/bin/arduino-ide \
+        --add-flags "--ozone-platform=x11"
+    '';
+  });
+in
+{
+  environment.systemPackages = [ arduinoIdeX11 ];
+}

modules/applications/atuin/home.nix

@@ -0,0 +1,9 @@
+{
+  programs.atuin = {
+    enable = true;
+
+    enableZshIntegration = true;
+    enableBashIntegration = true;
+    enableFishIntegration = true;
+  };
+}

modules/applications/baobab/home.nix

@@ -0,0 +1,4 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.baobab ];
+}

modules/applications/btop/dracula.theme

@@ -0,0 +1,89 @@
+# Bashtop theme with Nord palette (https://www.nordtheme.com)
+# by Justin Zobel <[email protected]>
+
+# Colors should be in 6 or 2 character hexadecimal or single spaced rgb decimal: "#RRGGBB", "#BW" or "0-255 0-255 0-255"
+# example for white: "#ffffff", "#ff" or "255 255 255".
+
+# All graphs and meters can be gradients
+# For single color graphs leave "mid" and "end" variable empty.
+# Use "start" and "end" variables for two color gradient
+# Use "start", "mid" and "end" for three color gradient
+
+# Main background, empty for terminal default, need to be empty if you want transparent background
+theme[main_bg]="#282A36"
+
+# Main text color
+theme[main_fg]="#BD93F9"
+
+# Title color for boxes
+theme[title]="#f8f8f2"
+
+# Highlight color for keyboard shortcuts
+theme[hi_fg]="#ff79c6"
+
+# Background color of selected item in processes box
+theme[selected_bg]="#44475A"
+
+# Foreground color of selected item in processes box
+theme[selected_fg]="#ECEFF4"
+
+# Color of inactive/disabled text
+theme[inactive_fg]="#6272a4"
+
+# Misc colors for processes box including mini cpu graphs, details memory graph and details status text
+theme[proc_misc]="#BD93F9"
+
+# Cpu box outline color
+theme[cpu_box]="#ff79c6"
+
+# Memory/disks box outline color
+theme[mem_box]="#ff79c6"
+
+# Net up/down box outline color
+theme[net_box]="#ff79c6"
+
+# Processes box outline color
+theme[proc_box]="#ff79c6"
+
+# Box divider line and small boxes line color
+theme[div_line]="#ff79c6"
+
+# Temperature graph colors
+theme[temp_start]="#bd93f9"
+theme[temp_mid]="#bd93f9"
+theme[temp_end]="#bd93f9"
+
+# CPU graph colors
+theme[cpu_start]="#bd93f9"
+theme[cpu_mid]="#bd93f9"
+theme[cpu_end]="#bd93f9"
+
+# Mem/Disk free meter
+theme[free_start]="#bd93f9"
+theme[free_mid]="#bd93f9"
+theme[free_end]="#bd93f9"
+
+# Mem/Disk cached meter
+theme[cached_start]="#bd93f9"
+theme[cached_mid]="#bd93f9"
+theme[cached_end]="#bd93f9"
+
+# Mem/Disk available meter
+theme[available_start]="#bd93f9"
+theme[available_mid]="#bd93f9"
+theme[available_end]="#bd93f9"
+
+# Mem/Disk used meter
+theme[used_start]="#bd93f9"
+theme[used_mid]="#bd93f9"
+theme[used_end]="#bd93f9"
+
+# Download graph colors
+theme[download_start]="#bd93f9"
+theme[download_mid]="#bd93f9"
+theme[download_end]="#bd93f9"
+
+# Upload graph colors
+theme[upload_start]="#bd93f9"
+theme[upload_mid]="#bd93f9"
+theme[upload_end]="#bd93f9"

modules/applications/btop/home.nix

@@ -0,0 +1,8 @@
+{
+  programs.btop = {
+    enable = true;
+
+    settings.color_theme = "dracula";
+    themes.dracula = builtins.readFile ./dracula.theme;
+  };
+}

modules/applications/celluloid/home/nixos.nix

@@ -0,0 +1,31 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.celluloid ];
+
+  xdg.mimeApps = {
+    enable = true;
+    defaultApplicationPackages = [ pkgs.celluloid ];
+    defaultApplications = builtins.listToAttrs (
+      map
+        (mime: {
+          name = mime;
+          value = [ "io.github.celluloid_player.Celluloid.desktop" ];
+        })
+        [
+          "video/3gpp"
+          "video/3gpp2"
+          "video/mp2t"
+          "video/mp4"
+          "video/mpeg"
+          "video/ogg"
+          "video/quicktime"
+          "video/webm"
+          "video/x-flv"
+          "video/x-m4v"
+          "video/x-matroska"
+          "video/x-msvideo"
+          "video/x-ms-wmv"
+        ]
+    );
+  };
+}

modules/applications/chrome/darwin.nix

@@ -0,0 +1,6 @@
+{
+  homebrew = {
+    enable = true;
+    casks = [ "google-chrome" ];
+  };
+}

modules/applications/chrome/home/nixos.nix

@@ -0,0 +1,19 @@
+_: {
+  programs.google-chrome = {
+    enable = true;
+
+    commandLineArgs = [
+      "--enable-features=MiddleClickAutoscroll"
+    ];
+  };
+
+  xdg.mimeApps = {
+    enable = true;
+
+    defaultApplications = {
+      "text/html" = "google-chrome.desktop";
+      "x-scheme-handler/http" = "google-chrome.desktop";
+      "x-scheme-handler/https" = "google-chrome.desktop";
+    };
+  };
+}

modules/applications/claude/home.nix

@@ -0,0 +1,18 @@
+{
+  inputs,
+  pkgs,
+  ...
+}:
+{
+  home.packages = [
+    inputs.llm-agents.packages.${pkgs.stdenv.hostPlatform.system}.claude-code
+  ];
+
+  home.file.".claude/settings.json".text = builtins.toJSON {
+    statusLine = {
+      type = "command";
+      command = "bun x ccusage statusline --no-offline";
+      padding = 0;
+    };
+  };
+}

modules/applications/codex-desktop/darwin.nix

@@ -0,0 +1,8 @@
+{
+  # The former Codex app cask is deprecated in favor of ChatGPT, whose desktop
+  # application includes the current Codex experience on macOS.
+  homebrew = {
+    enable = true;
+    casks = [ "chatgpt" ];
+  };
+}

modules/applications/codex-desktop/meta.nix

@@ -0,0 +1,10 @@
+{ inputs, ... }:
+{
+  description = "Codex Desktop for Linux";
+
+  includes = [ "applications.codex" ];
+
+  imports.nixos = [
+    inputs.codex-desktop-linux.nixosModules.default
+  ];
+}

modules/applications/codex-desktop/nixos.nix

@@ -0,0 +1,18 @@
+{
+  inputs,
+  pkgs,
+  ...
+}:
+{
+  programs.codexDesktopLinux = {
+    enable = true;
+    cliPackage = inputs.llm-agents.packages.${pkgs.stdenv.hostPlatform.system}.codex;
+    remoteControl.enable = true;
+    remoteMobileControl.enable = true;
+    computerUseUi.enable = false;
+    linuxFeatures = [
+      "appshots"
+      "open-target-discovery"
+    ];
+  };
+}

modules/applications/codex/home.nix

@@ -0,0 +1,6 @@
+{ inputs, pkgs, ... }:
+{
+  home.packages = [
+    inputs.llm-agents.packages.${pkgs.stdenv.hostPlatform.system}.codex
+  ];
+}

modules/applications/direnv/home.nix

@@ -0,0 +1,10 @@
+{
+  programs.direnv = {
+    enable = true;
+    nix-direnv.enable = true;
+
+    config.global = {
+      warn_timeout = "10s";
+    };
+  };
+}

modules/applications/discord/home.nix

@@ -0,0 +1,95 @@
+_: {
+  programs.vesktop = {
+    enable = true;
+
+    settings = {
+      discordBranch = "stable";
+
+      hardwareAcceleration = true;
+      hardwareVideoAcceleration = true;
+
+      tray = true;
+      minimizeToTray = true;
+
+      # Discord Rich Presence
+      arRPC = true;
+
+      openLinksWithElectron = false;
+
+      spellCheckLanguages = [
+        "ja-JP"
+        "en-US"
+      ];
+    };
+
+    vencord = {
+      useSystem = false;
+
+      settings = {
+        autoUpdate = true;
+        autoUpdateNotification = false;
+
+        useQuickCss = false;
+
+        cloud.settingsSync = false;
+
+        notifications = {
+          position = "bottom-right";
+          useNative = "not-focused";
+          timeout = 5000;
+          logLimit = 50;
+        };
+
+        plugins = {
+          # プライバシー・安全性
+          NoTrack.enabled = true;
+          ClearURLs.enabled = true;
+
+          # 設定・セッション
+          BetterSettings.enabled = true;
+          BetterSessions.enabled = true;
+
+          # 画像・添付ファイル
+          FixImagesQuality.enabled = true;
+          ImageZoom.enabled = true;
+          ViewIcons.enabled = true;
+          CopyFileContents.enabled = true;
+
+          # メッセージ操作
+          QuickReply.enabled = true;
+          SendTimestamps.enabled = true;
+          FullSearchContext.enabled = true;
+          MessageLinkEmbeds.enabled = true;
+          Unindent.enabled = true;
+          ValidReply.enabled = true;
+
+          # 通知・誤操作対策
+          ReadAllNotificationsButton.enabled = true;
+          NoReplyMention.enabled = true;
+          NotificationVolume.enabled = true;
+
+          # UI・パフォーマンス
+          NoTypingAnimation.enabled = true;
+          FavoriteEmojiFirst.enabled = true;
+          KeepCurrentChannel.enabled = true;
+
+          # サーバー・権限確認
+          PermissionsViewer.enabled = true;
+          MemberCount.enabled = true;
+
+          # ボイス・アクティビティ
+          CallTimer.enabled = true;
+          GameActivityToggle.enabled = true;
+
+          # Vesktop向け
+          WebKeybinds.enabled = true;
+          WebScreenShareFixes.enabled = true;
+
+          # Message history
+          MessageLogger.enabled = true;
+          ShowHiddenChannels.enabled = true;
+        };
+      };
+    };
+  };
+}

modules/applications/docker/darwin.nix

@@ -0,0 +1,6 @@
+{
+  homebrew = {
+    enable = true;
+    casks = [ "orbstack" ];
+  };
+}

modules/applications/docker/home/common.nix

@@ -0,0 +1,6 @@
+{ pkgs, ... }:
+{
+  home.packages = [
+    pkgs.docker-client
+  ];
+}

modules/applications/docker/home/nixos.nix

@@ -0,0 +1,6 @@
+{ pkgs, ... }:
+{
+  home.packages = [
+    pkgs.oxker
+  ];
+}

modules/applications/docker/meta.nix

@@ -0,0 +1,5 @@
+{
+  description = "Docker command-line client and NixOS daemon";
+
+  includes = [ "services.docker" ];
+}

modules/applications/drawio/home.nix

@@ -0,0 +1,4 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.drawio ];
+}

modules/applications/easyeffects/home/nixos.nix

@@ -0,0 +1,4 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.easyeffects ];
+}

modules/applications/fcitx5/home/nixos.nix

@@ -0,0 +1,82 @@
+{ inputs, pkgs, ... }:
+{
+
+  services.hazkey = {
+    enable = true;
+    server.package =
+      inputs.nix-hazkey.packages.${pkgs.stdenv.hostPlatform.system}.hazkey-server.override
+        { enableVulkan = true; };
+  };
+
+  i18n.inputMethod = {
+    enable = true;
+    type = "fcitx5";
+
+    fcitx5 = {
+      waylandFrontend = true;
+
+      addons = with pkgs; [
+        fcitx5-gtk
+        kdePackages.fcitx5-qt
+        qt6Packages.fcitx5-configtool
+      ];
+
+      settings = {
+        inputMethod = {
+          GroupOrder."0" = "Default";
+
+          "Groups/0" = {
+            Name = "Default";
+            "Default Layout" = "jp";
+            DefaultIM = "hazkey";
+          };
+
+          "Groups/0/Items/0" = {
+            Name = "keyboard-jp";
+          };
+
+          "Groups/0/Items/1" = {
+            Name = "hazkey";
+          };
+        };
+
+        globalOptions = {
+          Hotkey = {
+            EnumerateWithTriggerKeys = false;
+            EnumerateSkipFirst = false;
+            ModifierOnlyKeyTimeout = 250;
+          };
+
+          "Hotkey/TriggerKeys"."1" = "Zenkaku_Hankaku";
+          "Hotkey/ActivateKeys"."0" = "Henkan";
+          "Hotkey/DeactivateKeys"."0" = "Muhenkan";
+          "Hotkey/PrevPage"."0" = "Up";
+          "Hotkey/NextPage"."0" = "Down";
+          "Hotkey/PrevCandidate"."0" = "Shift+Tab";
+          "Hotkey/NextCandidate"."0" = "Tab";
+          "Hotkey/TogglePreedit"."0" = "Control+Alt+P";
+
+          Behavior = {
+            ActiveByDefault = false;
+            resetStateWhenFocusIn = "No";
+            ShareInputState = "No";
+            PreeditEnabledByDefault = true;
+            ShowInputMethodInformation = true;
+            showInputMethodInformationWhenFocusIn = false;
+            CompactInputMethodInformation = true;
+            ShowFirstInputMethodInformation = true;
+            DefaultPageSize = 5;
+            OverrideXkbOption = false;
+            CustomXkbOption = "";
+            EnabledAddons = "";
+            DisabledAddons = "";
+            PreloadInputMethod = true;
+            AllowInputMethodForPassword = false;
+            ShowPreeditForPassword = false;
+            AutoSavePeriod = 30;
+          };
+        };
+      };
+    };
+  };
+}

modules/applications/fcitx5/meta.nix

@@ -0,0 +1,6 @@
+{ inputs, ... }:
+{
+  description = "Fcitx 5 input method framework with Hazkey Japanese input";
+
+  imports.home = [ inputs.nix-hazkey.homeModules.hazkey ];
+}

modules/applications/finder/darwin.nix

@@ -0,0 +1,15 @@
+{
+  system.defaults.finder = {
+    AppleShowAllExtensions = true;
+    AppleShowAllFiles = false;
+    ShowPathbar = true;
+    ShowStatusBar = true;
+    _FXShowPosixPathInTitle = true;
+    _FXSortFoldersFirst = true;
+    FXDefaultSearchScope = "SCcf";
+    FXPreferredViewStyle = "Nlsv";
+    NewWindowTarget = "Home";
+    FXEnableExtensionChangeWarning = true;
+    FXRemoveOldTrashItems = true;
+  };
+}

modules/applications/gamemode/nixos.nix

@@ -0,0 +1,17 @@
+{
+  programs.gamemode = {
+    enable = true;
+    enableRenice = true;
+
+    settings = {
+      general = {
+        softrealtime = "auto";
+        renice = 10;
+      };
+      custom = {
+        start = "notify-send -a 'Gamemode' 'Optimizations activated'";
+        end = "notify-send -a 'Gamemode' 'Optimizations deactivated'";
+      };
+    };
+  };
+}

modules/applications/gamescope/nixos.nix

@@ -0,0 +1,6 @@
+{
+  programs.gamescope = {
+    enable = true;
+    capSysNice = true;
+  };
+}

modules/applications/ghostty/darwin.nix

@@ -0,0 +1,6 @@
+{
+  homebrew = {
+    enable = true;
+    casks = [ "ghostty" ];
+  };
+}

modules/applications/ghostty/home/common.nix

@@ -0,0 +1,39 @@
+_: {
+  programs.ghostty = {
+    enable = true;
+
+    settings = {
+      theme = "dracula";
+      background-blur-radius = 20;
+      background-opacity = 0.9;
+      background-opacity-cells = true;
+      font-family = "BlexMono Nerd Font Mono";
+      mouse-hide-while-typing = true;
+      window-decoration = "auto";
+
+      keybind = [
+        "performable:ctrl+shift+c=copy_to_clipboard"
+        "ctrl+shift+v=paste_from_clipboard"
+        "ctrl+shift+t=new_tab"
+        "ctrl+alt+left_bracket=previous_tab"
+        "ctrl+alt+right_bracket=next_tab"
+        "alt+q=close_window"
+        "global:alt+space=toggle_quick_terminal"
+        "global:alt+t=new_window"
+        "ctrl+shift+semicolon=increase_font_size:1"
+        "ctrl+shift+minus=decrease_font_size:1"
+      ];
+
+      quick-terminal-screen = "mouse";
+      quick-terminal-position = "top";
+      quick-terminal-size = "98%,100%";
+      quick-terminal-autohide = false;
+      quick-terminal-keyboard-interactivity = "on-demand";
+      gtk-quick-terminal-layer = "top";
+      quit-after-last-window-closed = false;
+      shell-integration-features = "no-ssh-env,no-ssh-terminfo";
+    };
+  };
+
+  xdg.configFile."ghostty/themes/dracula".source = ./dracula.theme;
+}

modules/applications/ghostty/home/darwin.nix

@@ -0,0 +1,17 @@
+_: {
+  # Global Ghostty keybindings are handled by the running app. Start it hidden
+  # at login so Option+T and Option+Space work before opening a terminal.
+  launchd.agents.ghostty-global-keybindings = {
+    enable = true;
+    config = {
+      ProgramArguments = [
+        "/usr/bin/open"
+        "-gja"
+        "Ghostty"
+      ];
+      RunAtLoad = true;
+    };
+  };
+
+  programs.ghostty.package = null;
+}

modules/applications/ghostty/home/dracula.theme

@@ -0,0 +1,44 @@
+# MIT License
+#
+# Copyright (c) 2023 Dracula Theme
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+
+palette = 0=#21222c
+palette = 1=#ff5555
+palette = 2=#50fa7b
+palette = 3=#f1fa8c
+palette = 4=#bd93f9
+palette = 5=#ff79c6
+palette = 6=#8be9fd
+palette = 7=#f8f8f2
+palette = 8=#6272a4
+palette = 9=#ff6e6e
+palette = 10=#69ff94
+palette = 11=#ffffa5
+palette = 12=#d6acff
+palette = 13=#ff92df
+palette = 14=#a4ffff
+palette = 15=#ffffff
+background = #282a36
+foreground = #f8f8f2
+cursor-color = #f8f8f2
+cursor-text = #282a36
+selection-foreground = #f8f8f2
+selection-background = #44475a

modules/applications/ghostty/home/nixos.nix

@@ -0,0 +1,6 @@
+{ inputs, system, ... }: {
+  programs.ghostty = {
+    systemd.enable = true;
+    package = inputs.ghostty.packages.${system}.default;
+  };
+}

modules/applications/git/home.nix

@@ -0,0 +1,78 @@
+{ pkgs, ... }:
+let
+  signingKeyPath = ".ssh/1password-git-signing.pub";
+  signingKeyFile = "~/${signingKeyPath}";
+
+  gitSshSign = pkgs.writeShellScript "git-ssh-sign" ''
+    one_password_sock="$HOME/.1password/agent.sock"
+
+    if { [ -n "''${SSH_CONNECTION:-}" ] || [ -n "''${SSH_CLIENT:-}" ]; } \
+      && [ -n "''${SSH_AUTH_SOCK:-}" ] \
+      && [ -S "$SSH_AUTH_SOCK" ]; then
+      exec ${pkgs.openssh}/bin/ssh-keygen "$@"
+    fi
+
+    if [ -S "$one_password_sock" ]; then
+      export SSH_AUTH_SOCK="$one_password_sock"
+      exec ${pkgs.openssh}/bin/ssh-keygen "$@"
+    fi
+
+    if [ -n "''${SSH_AUTH_SOCK:-}" ] && [ -S "$SSH_AUTH_SOCK" ]; then
+      exec ${pkgs.openssh}/bin/ssh-keygen "$@"
+    fi
+
+    echo "git ssh signing failed: no forwarded SSH agent or 1Password agent socket found" >&2
+    echo "expected: forwarded SSH_AUTH_SOCK or $one_password_sock" >&2
+    exit 1
+  '';
+in
+{
+  home.packages = [ pkgs.gh ];
+
+  home.file.${signingKeyPath}.text = ''
+    ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPLwReAiwhXoO34S2+MrvqUhi8IWp4IzUq4OSp3niJdq 1password-git-signing
+  '';
+
+  programs.git = {
+    enable = true;
+
+    ignores = [
+      ".direnv/"
+      ".envrc"
+      "!.envrc.example"
+    ];
+
+    signing = {
+      key = signingKeyFile;
+      format = "ssh";
+      signByDefault = true;
+    };
+
+    settings = {
+      user = {
+        name = "moons";
+        email = "moons@moons14.com";
+      };
+
+      push.default = "simple";
+      credential.helper = "cache --timeout=7200";
+      init.defaultBranch = "main";
+      log.decorate = "full";
+      log.date = "iso";
+      merge.conflictStyle = "diff3";
+
+      gpg.ssh.program = "${gitSshSign}";
+
+      alias = {
+        br = "branch --sort=-committerdate";
+        co = "checkout";
+        df = "diff";
+        com = "commit -a";
+        gs = "stash";
+        gp = "pull";
+        lg = "log --graph --pretty=format:'%Cred%h%Creset - %C(yellow)%d%Creset %s %C(green)(%cr)%C(bold blue) <%an>%Creset' --abbrev-commit";
+        st = "status";
+      };
+    };
+  };
+}

modules/applications/gnome-disk-utility/home/nixos.nix

@@ -0,0 +1,4 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.gnome-disk-utility ];
+}

modules/applications/gnome-text-editor/home/nixos.nix

@@ -0,0 +1,24 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.gnome-text-editor ];
+
+  dconf.settings."org/gnome/TextEditor" = {
+    style-variant = "follow";
+    wrap-text = true;
+    spellcheck = true;
+    restore-session = true;
+    show-line-numbers = false;
+    show-right-margin = false;
+    show-map = false;
+    highlight-current-line = false;
+    auto-indent = false;
+    discover-settings = false;
+    enable-snippets = false;
+    keybindings = "default";
+  };
+
+  xdg.mimeApps = {
+    enable = true;
+    defaultApplicationPackages = [ pkgs.gnome-text-editor ];
+  };
+}

modules/applications/gnupg/home.nix

@@ -0,0 +1,9 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.gnupg ];
+
+  services.gpg-agent = {
+    enable = false;
+    enableSshSupport = false;
+  };
+}

modules/applications/gnupg/nixos.nix

@@ -0,0 +1,6 @@
+{
+  programs.gnupg.agent = {
+    enable = true;
+    enableSSHSupport = false;
+  };
+}

modules/applications/grok/home.nix

@@ -0,0 +1,6 @@
+{ inputs, pkgs, ... }:
+{
+  home.packages = [
+    inputs.llm-agents.packages.${pkgs.stdenv.hostPlatform.system}.grok
+  ];
+}

modules/applications/gtk/home.nix

@@ -0,0 +1,22 @@
+{ pkgs, ... }:
+{
+  gtk = {
+    enable = true;
+    theme = {
+      name = "Dracula";
+      package = pkgs.dracula-theme;
+    };
+    cursorTheme = {
+      package = pkgs.adwaita-icon-theme;
+      name = "Adwaita";
+    };
+    iconTheme = {
+      package = pkgs.papirus-icon-theme;
+      name = "Papirus-Dark";
+    };
+  };
+
+  dconf.settings."org/gnome/desktop/wm/preferences" = {
+    button-layout = ":minimize,maximize,close";
+  };
+}

modules/applications/gtk/nixos.nix

@@ -0,0 +1,6 @@
+{
+  programs.dconf.enable = true;
+  programs.seahorse.enable = true;
+  services.gnome.gnome-keyring.enable = true;
+  security.pam.services.ly.enableGnomeKeyring = true;
+}

modules/applications/handy/darwin.nix

@@ -0,0 +1,8 @@
+{
+  homebrew.casks = [ "handy" ];
+
+  launchd.agents.handy = {
+    command = "/usr/bin/open -gja Handy --args --start-hidden";
+    serviceConfig.RunAtLoad = true;
+  };
+}

modules/applications/handy/home/nixos.nix

@@ -0,0 +1,74 @@
+{
+  config,
+  inputs,
+  lib,
+  pkgs,
+  ...
+}:
+let
+  handy = inputs.handy.packages.${pkgs.stdenv.hostPlatform.system}.handy;
+  settingsFile = "${config.xdg.configHome}/com.pais.handy/settings_store.json";
+in
+{
+  home.packages = [
+    handy
+    pkgs.wtype
+  ];
+
+  # Handy has no disabled-shortcut setting. Empty bindings are rejected before
+  # registration, leaving niri and labwc as the sole owners of Ctrl+Space.
+  home.activation.disableHandyGlobalShortcuts = {
+    after = [ "writeBoundary" ];
+    before = [ ];
+    data = ''
+      settingsFile=${lib.escapeShellArg settingsFile}
+      mkdir -p "$(dirname "$settingsFile")"
+
+      if [ -f "$settingsFile" ]; then
+        ${lib.getExe pkgs.jq} \
+          '.settings.bindings.transcribe.current_binding = ""
+          | .settings.bindings.transcribe_with_post_process.current_binding = ""' \
+          "$settingsFile" > "$settingsFile.tmp"
+      else
+        ${lib.getExe pkgs.jq} -n '
+          {
+            settings: {
+              bindings: {
+                transcribe: {
+                  id: "transcribe",
+                  name: "Transcribe",
+                  description: "Converts your speech into text.",
+                  default_binding: "ctrl+space",
+                  current_binding: ""
+                },
+                transcribe_with_post_process: {
+                  id: "transcribe_with_post_process",
+                  name: "Transcribe with Post-Processing",
+                  description: "Converts your speech into text and applies AI post-processing.",
+                  default_binding: "ctrl+shift+space",
+                  current_binding: ""
+                }
+              }
+            }
+          }
+        ' > "$settingsFile.tmp"
+      fi
+
+      mv "$settingsFile.tmp" "$settingsFile"
+    '';
+  };
+
+  systemd.user.services.handy = {
+    Unit = {
+      Description = "Handy speech-to-text";
+      After = [ "graphical-session.target" ];
+      PartOf = [ "graphical-session.target" ];
+    };
+    Service = {
+      ExecStart = "${lib.getExe handy} --start-hidden";
+      Restart = "on-failure";
+      RestartSec = 5;
+    };
+    Install.WantedBy = [ "graphical-session.target" ];
+  };
+}

modules/applications/handy/meta.nix

@@ -0,0 +1,3 @@
+{
+  description = "Handy offline speech-to-text";
+}

modules/applications/java/home.nix

@@ -0,0 +1,12 @@
+{ pkgs, ... }:
+{
+  programs.java = {
+    enable = true;
+    package = pkgs.jdk25;
+  };
+
+  home.packages = with pkgs; [
+    maven
+    gradle
+  ];
+}

modules/applications/kde/darwin.nix

@@ -0,0 +1,6 @@
+{
+  homebrew = {
+    enable = true;
+    casks = [ "kde-connect" ];
+  };
+}

modules/applications/kde/nixos.nix

@@ -0,0 +1,3 @@
+{
+  programs.kdeconnect.enable = true;
+}

modules/applications/labwc/home.nix

@@ -0,0 +1,228 @@
+{ lib, pkgs, ... }:
+let
+  systemctl = lib.getExe' pkgs.systemd "systemctl";
+
+  keybind = key: actionAttrs: {
+    "@key" = key;
+    action = actionAttrs;
+  };
+
+  action =
+    key: name:
+    keybind key {
+      "@name" = name;
+    };
+
+  execute =
+    key: command:
+    keybind key {
+      "@name" = "Execute";
+      "@command" = command;
+    };
+
+  snapToEdge =
+    key: direction:
+    keybind key {
+      "@name" = "SnapToEdge";
+      "@direction" = direction;
+      "@combine" = "yes";
+    };
+
+  confirmAction = key: message: name: {
+    "@key" = key;
+    action = {
+      "@name" = "If";
+      prompt."@message" = message;
+      "then".action."@name" = name;
+    };
+  };
+
+  menuExecute = label: command: {
+    inherit label;
+    action = {
+      name = "Execute";
+      inherit command;
+    };
+  };
+
+  showMenu = button: menu: {
+    "@button" = button;
+    "@action" = "Press";
+    action = {
+      "@name" = "ShowMenu";
+      "@menu" = menu;
+    };
+  };
+
+  menuAction = label: name: {
+    inherit label;
+    action.name = name;
+  };
+in
+{
+  wayland.windowManager.labwc = {
+    enable = true;
+    # NixOS owns the package so Home Manager only generates the user config.
+    package = null;
+
+    systemd = {
+      enable = true;
+
+      variables = [
+        "DISPLAY"
+        "WAYLAND_DISPLAY"
+        "XDG_CURRENT_DESKTOP"
+        "XDG_SESSION_TYPE"
+      ];
+    };
+
+    menu = [
+      {
+        menuId = "root-menu";
+        items = [
+          (menuExecute "ターミナル" "ghostty")
+          (menuExecute "Vicinae" "vicinae toggle")
+          (menuExecute "ファイル" "nautilus --new-window")
+
+          { separator = true; }
+
+          (menuAction "Reconfigure" "Reconfigure")
+          (menuAction "Exit" "Exit")
+        ];
+      }
+    ];
+
+    rc = {
+
+      keyboard = {
+        default = true;
+        numlock = "on";
+        keybind = [
+          # labwc window management
+          (action "W-q" "Close")
+          (action "W-f" "ToggleMaximize")
+          (action "W-c" "Iconify")
+          (action "W-Tab" "NextWindow")
+          (action "W-S-Tab" "PreviousWindow")
+          (action "W-Up" "Lower")
+          (action "W-Down" "Raise")
+          (action "W-Left" "NextWindow")
+          (action "W-Right" "PreviousWindow")
+          (snapToEdge "W-C-Left" "left")
+          (snapToEdge "W-C-Right" "right")
+          (snapToEdge "W-C-Up" "up")
+          (snapToEdge "W-C-Down" "down")
+          (confirmAction "W-S-e" "Exit labwc?" "Exit")
+          (execute "Print" "screenshot region")
+          (execute "C-Print" "screenshot output")
+          (execute "A-Print" "screenshot all")
+
+          # spawn applications (sync with niri modules/applications/niri/home.nix)
+          (execute "W-t" "ghostty")
+          (execute "W-d" "vicinae toggle")
+          (execute "W-s" "noctalia msg panel-toggle launcher")
+          (execute "W-e" "nautilus --new-window")
+          (execute "W-l" "loginctl lock-session")
+          (execute "W-v" "vicinae vicinae://launch/clipboard/history?toggle=true")
+          (execute "W-j" "nani-translate-primary")
+          (execute "W-S-j" "normcap-translate")
+          (execute "W-C-j" "${lib.getExe' pkgs.xdg-utils "xdg-open"} naniapp://translate")
+          (execute "W-space" "ghostty +toggle-quick-terminal")
+          (execute "W-p" "wdisplays")
+          (execute "W-z" "wl-find-cursor -c 0xCCFF453A -s 160 -d 1200")
+          (execute "C-space" "handy --toggle-transcription")
+
+          # Function keys (sync with niri modules/applications/niri/home.nix)
+          (execute "XF86AudioRaiseVolume" "noctalia msg volume-up")
+          (execute "XF86AudioLowerVolume" "noctalia msg volume-down")
+          (execute "XF86AudioMute" "noctalia msg volume-mute")
+          (execute "XF86AudioMicMute" "noctalia msg mic-mute")
+          (execute "XF86MonBrightnessUp" "noctalia msg brightness-up")
+          (execute "XF86MonBrightnessDown" "noctalia msg brightness-down")
+          (execute "XF86Favorites" "noctalia msg caffeine-toggle")
+          (execute "XF86AudioPlay" "playerctl play-pause")
+          (execute "XF86AudioPause" "playerctl play-pause")
+          (execute "XF86AudioStop" "playerctl stop")
+          (execute "XF86AudioPrev" "playerctl previous")
+          (execute "XF86AudioNext" "playerctl next")
+          (execute "XF86Display" "wdisplays")
+        ];
+      };
+
+      core = {
+        decoration = "client";
+        gap = 10;
+        autoEnableOutputs = "yes";
+        reuseOutputMode = "yes";
+      };
+
+      theme = {
+        name = "Dracula";
+        cornerRadius = 8;
+        dropShadows = "yes";
+        dropShadowsOnTiled = "yes";
+      };
+
+      windowSwitcher = {
+        "@preview" = "yes";
+        "@outlines" = "yes";
+        osd = {
+          "@style" = "thumbnail";
+        };
+      };
+
+      focus = {
+        followMouse = "yes";
+        followMouseRequiresMovement = "yes";
+        raiseOnFocus = "no";
+      };
+
+      desktops = {
+        "@number" = 1;
+        "@popupTime" = 500;
+        "@prefix" = "Workspace";
+      };
+
+      mouse = {
+        default = true;
+
+        context = {
+          "@name" = "Desktop";
+
+          mousebind = [
+            (showMenu "Right" "root-menu")
+            (showMenu "Middle" "client-list-combined-menu")
+          ];
+        };
+      };
+
+      libinput.device = [
+        {
+          "@category" = "touchpad";
+          naturalScroll = "yes";
+          tap = "yes";
+          tapAndDrag = "yes";
+          dragLock = "yes";
+          clickMethod = "clickfinger";
+          scrollMethod = "twoFinger";
+          scrollFactor = "4.0";
+          disableWhileTyping = "yes";
+        }
+        {
+          "@category" = "non-touch";
+          pointerSpeed = "-0.1";
+          accelProfile = "flat";
+        }
+      ];
+    };
+
+    environment = [
+      "XKB_DEFAULT_LAYOUT=jp"
+      "XKB_DEFAULT_OPTIONS=ctrl:nocaps"
+    ];
+  };
+
+  xdg.configFile."labwc/shutdown".text = lib.mkAfter ''
+    ${systemctl} --user stop graphical-session.target
+  '';
+}

modules/applications/labwc/meta.nix

@@ -0,0 +1,9 @@
+{
+  description = "labwc Wayland stacking compositor";
+
+  includes = [
+    "systems.wayland"
+    "applications.screenshot"
+    "applications.wl-find-cursor"
+  ];
+}

modules/applications/labwc/nixos.nix

@@ -0,0 +1,62 @@
+{
+  inputs,
+  lib,
+  pkgs,
+  ...
+}:
+let
+  unstable = inputs.nixpkgs-unstable.legacyPackages.${pkgs.stdenv.hostPlatform.system};
+  labwc = unstable.labwc.overrideAttrs (oldAttrs: {
+    patches = (oldAttrs.patches or [ ]) ++ [
+      ./patches/remove-ext-workspace-output-on-destroy.patch
+    ];
+  });
+in
+{
+  programs.labwc = {
+    enable = true;
+    package = labwc;
+  };
+
+  xdg.portal.config.labwc.default = [
+    "wlr"
+    "gtk"
+  ];
+
+  # xdg-desktop-portal-wlr implements screencasting for wlroots compositors.
+  # Keep it with Labwc: Niri uses xdg-desktop-portal-gnome instead.
+  xdg.portal.wlr = {
+    enable = true;
+    settings.screencast = {
+      chooser_type = "dmenu";
+      chooser_cmd = "${pkgs.fuzzel}/bin/fuzzel --dmenu";
+    };
+  };
+
+  # NixOS decides whether a graphical session manages graphical-session.target
+  # itself by checking XDG_CURRENT_DESKTOP against a hard-coded list. Labwc is
+  # currently absent from that list, so NixOS starts
+  # nixos-fake-graphical-session.target before Labwc is ready.
+  #
+  # This configuration uses Home Manager's Labwc systemd integration, which
+  # imports the Wayland environment and starts labwc-session.target correctly.
+  # Mark the Labwc session as systemd-aware before the display-manager wrapper
+  # performs its hard-coded check. Otherwise services such as Fcitx5 can start
+  # before WAYLAND_DISPLAY is available.
+  #
+  # Despite the services.xserver namespace, this session wrapper is also used
+  # for Wayland sessions by display managers such as Ly.
+  services.xserver.displayManager.sessionCommands = lib.mkAfter ''
+    case ":''${XDG_CURRENT_DESKTOP:-}:" in
+      *:labwc:*)
+        case ":$XDG_CURRENT_DESKTOP:" in
+          *:X-NIXOS-SYSTEMD-AWARE:*)
+            ;;
+          *)
+            export XDG_CURRENT_DESKTOP="$XDG_CURRENT_DESKTOP:X-NIXOS-SYSTEMD-AWARE"
+            ;;
+        esac
+        ;;
+    esac
+  '';
+}

modules/applications/labwc/patches/remove-ext-workspace-output-on-destroy.patch

@@ -0,0 +1,28 @@
+From: Codex <[email protected]>
+Subject: [PATCH] output: remove destroyed output from ext-workspace group
+
+The DRM backend destroys and recreates outputs when a session is paused and
+resumed. Remove the output from the ext-workspace group before wlroots
+finishes it, otherwise the group's output_bind listener remains attached and
+wlr_output_finish() aborts.
+
+---
+ src/output.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/src/output.c b/src/output.c
+index 2eab8ec..f19c3ff 100644
+--- a/src/output.c
++++ b/src/output.c
+@@ -277,6 +277,9 @@ handle_output_destroy(struct wl_listener *listener, void *data)
+ 	struct seat *seat = &server.seat;
+ 	regions_evacuate_output(output);
+ 	regions_destroy(seat, &output->regions);
++	wlr_ext_workspace_group_handle_v1_output_leave(
++		server.workspaces.ext_group, output->wlr_output);
++
+ 	if (seat->overlay.active.output == output) {
+ 		overlay_finish(seat);
+ 	}
+-- 
+2.51.0

modules/applications/linux-wallpaperengine/home/controller.sh

@@ -0,0 +1,167 @@
+# shellcheck shell=bash
+
+set -o errexit -o nounset -o pipefail
+
+playlist_file="$1"
+default_id="$2"
+configuration_id="$3"
+shift 3
+
+state_dir="${XDG_RUNTIME_DIR:?}/linux-wallpaperengine"
+state_file="$state_dir/current"
+
+usage() {
+  printf '%s\n' \
+    'Usage: wallpaperengine-wallpaper COMMAND [ID]' \
+    '' \
+    'Commands:' \
+    '  select ID Select a declaratively configured ID for this session' \
+    '  next      Select the next configured ID' \
+    '  previous  Select the previous configured ID' \
+    '  list      List configured IDs and mark the selected one' \
+    '  current   Print the selected ID' \
+    '  restart   Restart the selected wallpaper' \
+    '  stop      Stop Wallpaper Engine for this session'
+}
+
+load_playlist() {
+  mapfile -t wallpaper_ids < <(awk '/^[0-9]+$/ && !seen[$0]++' "$playlist_file")
+  if [ "${#wallpaper_ids[@]}" -eq 0 ]; then
+    echo "wallpaperengine-wallpaper: no wallpaper IDs are configured in settings.nix" >&2
+    exit 1
+  fi
+}
+
+contains_id() {
+  local candidate="$1"
+  local id
+
+  for id in "${wallpaper_ids[@]}"; do
+    [ "$id" = "$candidate" ] && return 0
+  done
+  return 1
+}
+
+current_id() {
+  local saved_configuration=""
+  local saved_id=""
+  local -a saved_state=()
+
+  if [ -s "$state_file" ]; then
+    mapfile -t saved_state <"$state_file"
+    saved_configuration="${saved_state[0]:-}"
+    saved_id="${saved_state[1]:-}"
+  fi
+
+  if [ "$saved_configuration" = "$configuration_id" ] && contains_id "$saved_id"; then
+    printf '%s\n' "$saved_id"
+  else
+    printf '%s\n' "$default_id"
+  fi
+}
+
+select_id() {
+  local id="$1"
+
+  if ! contains_id "$id"; then
+    echo "wallpaperengine-wallpaper: ID is not declared in settings.nix: $id" >&2
+    exit 2
+  fi
+
+  mkdir -p "$state_dir"
+  printf '%s\n%s\n' "$configuration_id" "$id" >"$state_file"
+  systemctl --user restart linux-wallpaperengine.service
+}
+
+cycle() {
+  local step="$1"
+  local current
+  local index=0
+  local next_index
+
+  current=$(current_id)
+  for i in "${!wallpaper_ids[@]}"; do
+    if [ "${wallpaper_ids[$i]}" = "$current" ]; then
+      index="$i"
+      break
+    fi
+  done
+
+  next_index=$(((index + step + ${#wallpaper_ids[@]}) % ${#wallpaper_ids[@]}))
+  select_id "${wallpaper_ids[$next_index]}"
+}
+
+load_playlist
+
+command="${1:-}"
+if [ -z "$command" ]; then
+  usage
+  exit 2
+fi
+shift
+
+case "$command" in
+select)
+  [ "$#" -eq 1 ] || {
+    usage >&2
+    exit 2
+  }
+  select_id "$1"
+  ;;
+next)
+  [ "$#" -eq 0 ] || {
+    usage >&2
+    exit 2
+  }
+  cycle 1
+  ;;
+previous)
+  [ "$#" -eq 0 ] || {
+    usage >&2
+    exit 2
+  }
+  cycle -1
+  ;;
+list)
+  [ "$#" -eq 0 ] || {
+    usage >&2
+    exit 2
+  }
+  current=$(current_id)
+  for id in "${wallpaper_ids[@]}"; do
+    if [ "$id" = "$current" ]; then
+      printf '* %s\n' "$id"
+    else
+      printf '  %s\n' "$id"
+    fi
+  done
+  ;;
+current)
+  [ "$#" -eq 0 ] || {
+    usage >&2
+    exit 2
+  }
+  current_id
+  ;;
+restart)
+  [ "$#" -eq 0 ] || {
+    usage >&2
+    exit 2
+  }
+  systemctl --user restart linux-wallpaperengine.service
+  ;;
+stop)
+  [ "$#" -eq 0 ] || {
+    usage >&2
+    exit 2
+  }
+  systemctl --user stop linux-wallpaperengine.service
+  ;;
+help | -h | --help)
+  usage
+  ;;
+*)
+  usage >&2
+  exit 2
+  ;;
+esac

modules/applications/linux-wallpaperengine/home/launcher.sh

@@ -0,0 +1,57 @@
+# shellcheck shell=bash
+
+set -o errexit -o nounset -o pipefail
+
+playlist_file="$1"
+default_id="$2"
+configuration_id="$3"
+assets_dir="$4"
+workshop_dir="$5"
+scaling="$6"
+shift 6
+
+state_file="${XDG_RUNTIME_DIR:?}/linux-wallpaperengine/current"
+wallpaper_id="$default_id"
+saved_configuration=""
+saved_id=""
+saved_state=()
+outputs=()
+
+if [ -s "$state_file" ]; then
+  mapfile -t saved_state <"$state_file"
+  saved_configuration="${saved_state[0]:-}"
+  saved_id="${saved_state[1]:-}"
+
+  if [ "$saved_configuration" = "$configuration_id" ] &&
+    awk -v id="$saved_id" '$0 == id { found = 1 } END { exit !found }' "$playlist_file"; then
+    wallpaper_id="$saved_id"
+  fi
+fi
+
+wallpaper_path="$workshop_dir/$wallpaper_id"
+if [ ! -d "$wallpaper_path" ]; then
+  echo "linux-wallpaperengine: missing declared wallpaper: $wallpaper_path" >&2
+  exit 1
+fi
+
+if [ ! -d "$assets_dir" ]; then
+  echo "linux-wallpaperengine: missing Wallpaper Engine assets: $assets_dir" >&2
+  exit 1
+fi
+
+mapfile -t outputs < <(wlr-randr --json | jq -r '.[] | select(.enabled == true) | .name')
+if [ "${#outputs[@]}" -eq 0 ]; then
+  echo "linux-wallpaperengine: no enabled Wayland outputs were detected" >&2
+  exit 1
+fi
+
+engine_args=("$@" --assets-dir "$assets_dir")
+for output in "${outputs[@]}"; do
+  engine_args+=(
+    --screen-root "$output"
+    --bg "$wallpaper_path"
+    --scaling "$scaling"
+  )
+done
+
+exec linux-wallpaperengine "${engine_args[@]}"

modules/applications/linux-wallpaperengine/home/nixos.nix

@@ -0,0 +1,158 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+let
+  settings = import ../settings.nix;
+  inherit (settings)
+    assetsDirectory
+    fps
+    mute
+    scaling
+    selectedWallpaperId
+    switchIntervalSeconds
+    wallpaperIds
+    workshopDirectory
+    ;
+
+  resolveHomePath =
+    path:
+    if lib.hasPrefix "~/" path then
+      "${config.home.homeDirectory}/${lib.removePrefix "~/" path}"
+    else if lib.hasPrefix "/" path then
+      path
+    else
+      "${config.home.homeDirectory}/${path}";
+
+  hasWallpapers = wallpaperIds != [ ];
+  defaultWallpaperId =
+    if selectedWallpaperId != null then
+      selectedWallpaperId
+    else if hasWallpapers then
+      lib.head wallpaperIds
+    else
+      "";
+  configurationId = builtins.hashString "sha256" (builtins.toJSON settings);
+  resolvedAssetsDirectory = resolveHomePath assetsDirectory;
+  resolvedWorkshopDirectory = resolveHomePath workshopDirectory;
+  playlist = pkgs.writeText "linux-wallpaperengine-playlist" (
+    lib.concatMapStringsSep "\n" (id: id) wallpaperIds + "\n"
+  );
+  engineArguments = lib.optional mute "--silent" ++ [
+    "--fps"
+    (toString fps)
+  ];
+
+  controller = pkgs.writeShellApplication {
+    name = "wallpaperengine-wallpaper";
+    runtimeInputs = [
+      pkgs.coreutils
+      pkgs.gawk
+      pkgs.systemd
+    ];
+    text = ''
+      exec ${lib.getExe pkgs.bash} ${./controller.sh} \
+        ${lib.escapeShellArg playlist} \
+        ${lib.escapeShellArg defaultWallpaperId} \
+        ${lib.escapeShellArg configurationId} \
+        "$@"
+    '';
+  };
+
+  launcher = pkgs.writeShellApplication {
+    name = "linux-wallpaperengine-launcher";
+    runtimeInputs = [
+      pkgs.coreutils
+      pkgs.gawk
+      pkgs.jq
+      pkgs.linux-wallpaperengine
+      pkgs.wlr-randr
+    ];
+    text = ''
+      exec ${lib.getExe pkgs.bash} ${./launcher.sh} \
+        ${lib.escapeShellArg playlist} \
+        ${lib.escapeShellArg defaultWallpaperId} \
+        ${lib.escapeShellArg configurationId} \
+        ${lib.escapeShellArg resolvedAssetsDirectory} \
+        ${lib.escapeShellArg resolvedWorkshopDirectory} \
+        ${lib.escapeShellArg scaling} \
+        ${lib.escapeShellArgs engineArguments}
+    '';
+  };
+in
+assert lib.assertMsg (lib.all (
+  id: builtins.isString id && builtins.match "[0-9]+" id != null
+) wallpaperIds) "linux-wallpaperengine: wallpaperIds must contain only numeric strings";
+assert lib.assertMsg (
+  lib.unique wallpaperIds == wallpaperIds
+) "linux-wallpaperengine: wallpaperIds must not contain duplicates";
+assert lib.assertMsg (
+  selectedWallpaperId == null || builtins.elem selectedWallpaperId wallpaperIds
+) "linux-wallpaperengine: selectedWallpaperId must be null or a member of wallpaperIds";
+assert lib.assertMsg (
+  switchIntervalSeconds == null || (builtins.isInt switchIntervalSeconds && switchIntervalSeconds > 0)
+) "linux-wallpaperengine: switchIntervalSeconds must be null or a positive integer";
+assert lib.assertMsg (
+  builtins.isInt fps && fps > 0
+) "linux-wallpaperengine: fps must be a positive integer";
+assert lib.assertMsg (
+  builtins.isString assetsDirectory && assetsDirectory != ""
+) "linux-wallpaperengine: assetsDirectory must be a non-empty string";
+assert lib.assertMsg (
+  builtins.isString workshopDirectory && workshopDirectory != ""
+) "linux-wallpaperengine: workshopDirectory must be a non-empty string";
+assert lib.assertMsg (builtins.elem scaling [
+  "default"
+  "fill"
+  "fit"
+  "stretch"
+]) "linux-wallpaperengine: scaling must be default, fill, fit, or stretch";
+{
+  home.packages = [
+    controller
+    pkgs.linux-wallpaperengine
+  ];
+
+  systemd.user.services = lib.optionalAttrs hasWallpapers {
+    linux-wallpaperengine = {
+      Unit = {
+        Description = "Linux Wallpaper Engine";
+        After = [ "graphical-session.target" ];
+        PartOf = [ "graphical-session.target" ];
+      };
+      Service = {
+        ExecStart = lib.getExe launcher;
+        Restart = "on-abnormal";
+      };
+      Install.WantedBy = [ "graphical-session.target" ];
+    };
+
+    linux-wallpaperengine-switch = {
+      Unit.Description = "Switch Linux Wallpaper Engine wallpaper";
+      Service = {
+        Type = "oneshot";
+        ExecStart = "${lib.getExe controller} next";
+      };
+    };
+  };
+
+  systemd.user.timers =
+    lib.optionalAttrs
+      (hasWallpapers && builtins.length wallpaperIds > 1 && switchIntervalSeconds != null)
+      {
+        linux-wallpaperengine-switch = {
+          Unit = {
+            Description = "Periodically switch Linux Wallpaper Engine wallpaper";
+            PartOf = [ "graphical-session.target" ];
+          };
+          Timer = {
+            OnActiveSec = "${toString switchIntervalSeconds}s";
+            OnUnitActiveSec = "${toString switchIntervalSeconds}s";
+            Unit = "linux-wallpaperengine-switch.service";
+          };
+          Install.WantedBy = [ "graphical-session.target" ];
+        };
+      };
+}

modules/applications/linux-wallpaperengine/meta.nix

@@ -0,0 +1,3 @@
+{
+  description = "Wallpaper Engine backgrounds for Linux";
+}

modules/applications/linux-wallpaperengine/settings.nix

@@ -0,0 +1,23 @@
+{
+  assetsDirectory = "~/.local/share/Steam/steamapps/common/wallpaper_engine/assets";
+  workshopDirectory = "~/.local/share/Steam/steamapps/workshop/content/431960";
+
+  wallpaperIds = [
+    "2833810156"
+    "2834355367"
+    "2836628501"
+    "2845095254"
+    "2859848175"
+    "2861661119"
+    "2982896307"
+  ];
+
+  # null selects the first ID above.
+  selectedWallpaperId = null;
+  # Set a number such as 300 to rotate through multiple IDs.
+  switchIntervalSeconds = 300;
+
+  fps = 30;
+  mute = true;
+  scaling = "fill";
+}

modules/applications/loupe/home/nixos.nix

@@ -0,0 +1,22 @@
+{ pkgs, ... }:
+{
+  home.packages = [ pkgs.loupe ];
+
+  xdg.mimeApps = {
+    enable = true;
+    defaultApplicationPackages = [ pkgs.loupe ];
+
+    defaultApplications = {
+      "image/avif" = [ "org.gnome.Loupe.desktop" ];
+      "image/bmp" = [ "org.gnome.Loupe.desktop" ];
+      "image/gif" = [ "org.gnome.Loupe.desktop" ];
+      "image/heic" = [ "org.gnome.Loupe.desktop" ];
+      "image/heif" = [ "org.gnome.Loupe.desktop" ];
+      "image/jpeg" = [ "org.gnome.Loupe.desktop" ];
+      "image/jxl" = [ "org.gnome.Loupe.desktop" ];
+      "image/png" = [ "org.gnome.Loupe.desktop" ];
+      "image/svg+xml" = [ "org.gnome.Loupe.desktop" ];
+      "image/webp" = [ "org.gnome.Loupe.desktop" ];
+    };
+  };
+}

modules/applications/mangohud/home/nixos.nix

@@ -0,0 +1,3 @@
+_: {
+  programs.mangohud.enable = true;
+}